LM339ADE4 vs LM339MX Comparaison
Comparaison détaillée côte à côte de LM339ADE4 par Texas Instruments et LM339MX par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | LM339ADE4 | LM339MX |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Logic ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Comparator Type | Differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Propagation Delay | 300 ns typical | — |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Differential Input Voltage Range | -38 V to +38 V | [DATA_NEEDED: differential input voltage range] |
| Common-Mode Input Range | Includes ground | — |
| Type de sortie | Open collector | Open-Collector |
| Supply Current Drain | 0.8 mA typical | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Grade | Commercial grade | — |
| Boîtier | 14-pin SOIC | 14-pin SOIC |
| Package Width | 3.90 mm | — |
| Type de montage | Surface mount | Surface Mount |
| Nombre de broches | 14 pins | 14 |
| Input Bias Current | Low input bias current; exact value [DATA_NEEDED: input bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Response Time | — | 1.3 µs |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |