LM339ADE4 vs LM339MX तुलना
विस्तृत दोनों ओर की तुलना LM339ADE4 द्वारा Texas Instruments और LM339MX द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。
विशेषता तुलना
| पैरामीटर | LM339ADE4 | LM339MX |
|---|---|---|
| ब्रांड | Texas Instruments | Texas Instruments |
| श्रेणी | Logic ICs | Amplifier ICs |
| लाइफसाइकिल स्थिति | सक्रिय | सक्रिय |
| Comparator Type | Differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Propagation Delay | 300 ns typical | — |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Differential Input Voltage Range | -38 V to +38 V | [DATA_NEEDED: differential input voltage range] |
| Common-Mode Input Range | Includes ground | — |
| आउटपुट प्रकार | Open collector | Open-Collector |
| Supply Current Drain | 0.8 mA typical | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Grade | Commercial grade | — |
| पैकेज | 14-pin SOIC | 14-pin SOIC |
| Package Width | 3.90 mm | — |
| माउंटिंग प्रकार | Surface mount | Surface Mount |
| पिन की संख्या | 14 pins | 14 |
| Input Bias Current | Low input bias current; exact value [DATA_NEEDED: input bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| ऑपरेटिंग तापमान रेंज | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| RoHS स्थिति | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Response Time | — | 1.3 µs |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| सप्लाई करंट | — | [DATA_NEEDED: supply current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |