LM339ADE4 vs LM339MX موازنہ
تفصیلی ساتھ ساتھ موازنہ از LM339ADE4 بذریعہ Texas Instruments اور LM339MX بذریعہ Texas Instruments. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | LM339ADE4 | LM339MX |
|---|---|---|
| برانڈ | Texas Instruments | Texas Instruments |
| زمرہ | Logic ICs | Amplifier ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| Comparator Type | Differential comparator | General Purpose |
| Number of Channels | 4 channels | — |
| Propagation Delay | 300 ns typical | — |
| Supply Voltage Range | 2 V to 36 V | Approximately 36 V total, or approximately ±18 V |
| Differential Input Voltage Range | -38 V to +38 V | [DATA_NEEDED: differential input voltage range] |
| Common-Mode Input Range | Includes ground | — |
| آؤٹ پٹ کی قسم | Open collector | Open-Collector |
| Supply Current Drain | 0.8 mA typical | — |
| Logic Compatibility | TTL, MOS, and CMOS compatible | — |
| Grade | Commercial grade | — |
| پیکیج | 14-pin SOIC | 14-pin SOIC |
| Package Width | 3.90 mm | — |
| ماؤنٹنگ ٹائپ | Surface mount | Surface Mount |
| پنز کی تعداد | 14 pins | 14 |
| Input Bias Current | Low input bias current; exact value [DATA_NEEDED: input bias current] | — |
| Input Offset Voltage | [DATA_NEEDED: input offset voltage] | [DATA_NEEDED: input offset voltage] |
| آپریٹنگ درجہ حرارت رینج | [DATA_NEEDED: operating temperature range] | 0 °C to 70 °C |
| RoHS اسٹیٹس | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Number of Comparators | — | 4 |
| Single or Dual Supply Operation | — | Supported |
| Response Time | — | 1.3 µs |
| Output Compatibility | — | TTL, CMOS, MOS, DTL, and ECL |
| Channel Independence | — | 4 independent comparators |
| Common-Mode Input Voltage Range | — | [DATA_NEEDED: common-mode input voltage range] |
| سپلائی کرنٹ | — | [DATA_NEEDED: supply current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |
| Output Saturation Voltage | — | [DATA_NEEDED: output saturation voltage] |
| Pull-Up Resistor | — | [DATA_NEEDED: recommended pull-up resistor] |