LTC2309IF vs LTC2313HTS8-14 Comparaison
Comparaison détaillée côte à côte de LTC2309IF par Analog Devices et LTC2313HTS8-14 par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
LTC2313HTS8-14 - 14-bit 2.5Msps SAR ADC in TSOT-23-8 | Analog Devices
LTC2313HTS8-14 ✓ ActifComparaison des spécifications
| Paramètre | LTC2309IF | LTC2313HTS8-14 |
|---|---|---|
| Marque | Analog Devices | Analog Devices |
| Catégorie | ADC/DAC | ADC/DAC |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $9,50 | $4,10 |
| Résolution | 12 bit | 14 bits |
| Number of Input Channels | 8 single-ended / 4 differential | 1 (single-ended/differential) |
| Architecture | SAR (Successive Approximation Register) | SAR (Successive Approximation Register) |
| Conversion Time | 1.3 us per channel (typical) | — |
| Throughput Rate | up to 500 ksps (datasheet-dependent) | — |
| Supply Voltage (VDD) | 5 V single supply | — |
| Courant d'alimentation | 300 uA at 1 ksps (typical) | 5 mA at 2.5 Msps |
| Digital Interface | I2C-compatible, standard / fast / high-speed modes | — |
| I2C Address Selection | 2 pins (AD0, AD1) - up to 4 devices on one bus | — |
| Internal Reference | 2.5 V, 10 ppm/C typical drift | 2.5 V nominal, 20 ppm/°C max drift |
| External Reference Input (REFIN) | Yes, supports ratiometric operation | — |
| Sample-and-Hold | Fully differential, common-mode noise rejection | — |
| Analog Input Range | 0 V to VDD (unipolar); +/-VREF differential | — |
| Boîtier | 20-TSSOP (FE) | TSOT-23-8 (HTS8) |
| Operating Temperature Range (I grade) | -40 C to +85 C | — |
| Courant d'arrêt | Nap / I2C power-down supported | — |
| Statut RoHS | Compliant (PBF suffix) | Compliant |
| Sample Rate | — | 2.5 Msps |
| Tension d'alimentation | — | 3 V to 5 V (single supply, 5 V typical) |
| Input Type | — | Pseudo-differential (IN+, IN-) |
| Serial Interface | — | SPI-compatible SCK/SDO/SDI/CSF, supports 1.8 V/2.5 V/3 V/5 V logic |
| No-Missing-Codes Performance | — | 14 bits guaranteed |
| Latency | — | 0 conversion latency |
| Plage de température de fonctionnement | — | -40 °C to +125 °C (H-grade) |
| Type de montage | — | Surface Mount |
| Niveau MSL | — | 1 (per JEDEC J-STD-020) |
| Conversion Cycles | — | 16 SCK per conversion (14-bit plus 2 dummy bits) |