MAX202ECSE+TG068 vs MAX202ECSE+T Comparaison

Comparaison détaillée côte à côte de MAX202ECSE+TG068 par Analog Devices et MAX202ECSE+T par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ Actif
Maxim Integrated
MAX202ECSE+T MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T ✓ Actif

Comparaison des spécifications

Paramètre MAX202ECSE+TG068 MAX202ECSE+T
Marque Analog Devices Maxim Integrated
Catégorie Interface ICs Interface ICs
Statut du cycle de vie Actif Actif
Number of Drivers 2 2
Number of Receivers 2 2
Transceiver Configuration 2/2 full RS-232 2/2 full-duplex
Supported Protocol RS-232 —
Supply Voltage Range 4.5 V to 5.5 V —
ESD Protection 15 kV ±15 kV HBM
Boîtier 16-SOIC, 0.154 in x 3.90 mm width 16-pin narrow SOIC
Packaging Tape and reel —
Type de montage Surface mount Surface mount
Nombre de broches 16 —
Driver Output Count 2 —
Receiver Input Count 2 —
Communication Mode Full duplex —
Operating Voltage 4.5 V to 5.5 V —
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Débit de données [DATA_NEEDED: maximum data rate] —
Output High and Low Levels [DATA_NEEDED: RS-232 output voltage levels] —
Input Hysteresis [DATA_NEEDED: receiver input hysteresis] —
Courant d'alimentation [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Statut RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Product Type — RS-232 transceiver
Tension d'alimentation — +5 V
Maximum Data Rate — 120 kbit/s
Maximum Driver Output Slew Rate — 30 V/µs
Interface Standards — EIA/TIA-232E and V.28
Charge Pump — Integrated dual charge-pump circuitry
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
Driver Output Protection — [DATA_NEEDED: driver output protection]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Standard Compliance — EIA/TIA-232E and CCITT V.28

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis