MAX202ECSE+TG068 vs MAX202ECSE+T So sánh

So sánh chi tiết song song của MAX202ECSE+TG068 bằng Analog Devices và MAX202ECSE+T bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

Analog Devices
MAX202ECSE+TG068 MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 2/2 RS-232 Transceiver | Analog Devices

MAX202ECSE+TG068 ✓ Hoạt động
Maxim Integrated
MAX202ECSE+T MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T - 5V RS-232 Transceiver, 120kbps | Maxim

MAX202ECSE+T ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số MAX202ECSE+TG068 MAX202ECSE+T
Thương hiệu Analog Devices Maxim Integrated
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Number of Drivers 2 2
Number of Receivers 2 2
Transceiver Configuration 2/2 full RS-232 2/2 full-duplex
Supported Protocol RS-232 —
Supply Voltage Range 4.5 V to 5.5 V —
ESD Protection 15 kV ±15 kV HBM
Hộp 16-SOIC, 0.154 in x 3.90 mm width 16-pin narrow SOIC
Packaging Tape and reel —
Kiểu lắp đặt Surface mount Surface mount
Số lượng chân 16 —
Driver Output Count 2 —
Receiver Input Count 2 —
Communication Mode Full duplex —
Operating Voltage 4.5 V to 5.5 V —
Khoảng nhiệt độ hoạt động [DATA_NEEDED: operating temperature range] [DATA_NEEDED: operating temperature range]
Tốc độ dữ liệu [DATA_NEEDED: maximum data rate] —
Output High and Low Levels [DATA_NEEDED: RS-232 output voltage levels] —
Input Hysteresis [DATA_NEEDED: receiver input hysteresis] —
Điện áp cung cấp [DATA_NEEDED: typical and maximum supply current] [DATA_NEEDED: supply current]
Trạng thái RoHS [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
REACH Status [DATA_NEEDED: REACH status] [DATA_NEEDED: REACH status]
Product Type — RS-232 transceiver
Điện áp cung cấp — +5 V
Maximum Data Rate — 120 kbit/s
Maximum Driver Output Slew Rate — 30 V/µs
Interface Standards — EIA/TIA-232E and V.28
Charge Pump — Integrated dual charge-pump circuitry
Receiver Input Resistance — [DATA_NEEDED: receiver input resistance]
Driver Output Protection — [DATA_NEEDED: driver output protection]
Automotive Qualification — [DATA_NEEDED: AEC-Q100 qualification status]
Standard Compliance — EIA/TIA-232E and CCITT V.28

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá