MAX3485ECSA+T vs MAX3485CSA+ Comparaison
Comparaison détaillée côte à côte de MAX3485ECSA+T par Analog Devices et MAX3485CSA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ ActifComparaison des spécifications
| Paramètre | MAX3485ECSA+T | MAX3485CSA+ |
|---|---|---|
| Marque | Analog Devices | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Unknown |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection (Bus Pins) | +/-15 kV | — |
| Driver / Receiver Count | 1 driver, 1 receiver | — |
| Duplex | Half-duplex | — |
| Driver Output Type | Slew-rate-limited differential | — |
| Boîtier | 8-pin NSOIC (SOIC-8) | 8-SOIC, 0.154 inch, 3.90 mm width |
| Type de montage | Surface mount | Surface mount |
| Operating Supply Range | 3.3 V powered, single supply | — |
| Statut RoHS | RoHS3 compliant | — |
| Lead-Free Status | Lead free | — |
| Driver Protection | Short-circuit current limit and thermal shutdown | — |
| ESD Rating Reference | +/-15 kV ESD-protected bus pins | — |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | 0C to +70C |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Unit Load / Max Nodes | [DATA_NEEDED: unit load and maximum node count] | — |
| Data Rate of Alternative MAX3485CSA+ | 10 Mbps | — |
| Tension d'alimentation | — | 3.3 V |
| Débit de données | — | 10 Mbps |
| Duplex Mode | — | Half-duplex |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Feature | — | Slew-rate-limited driver family feature |
| Short-Circuit Protection | — | Short-circuit current limited driver |
| Arrêt thermique | — | Driver enters high-impedance state during thermal shutdown |
| Receiver Feature | — | Fail-safe receiver input |
| Channel Direction | — | 1 transmitter and 1 receiver |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Courant d'alimentation | — | [DATA_NEEDED: operating and quiescent supply current] |
| Logic Output Levels | — | [DATA_NEEDED: logic output voltage levels] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing requirements] |