MAX3485ECSA+T vs MAX3485CSA+ तुलना

विस्तृत दोनों ओर की तुलना MAX3485ECSA+T द्वारा Analog Devices और MAX3485CSA+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Analog Devices
MAX3485ECSA+T MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices

MAX3485ECSA+T ✓ सक्रिय
Maxim Integrated
MAX3485CSA+ MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ - 10Mbps 3.3V RS-485/RS-422 IC | Maxim

MAX3485CSA+ Unknown

विशेषता तुलना

पैरामीटर MAX3485ECSA+T MAX3485CSA+
ब्रांड Analog Devices Maxim Integrated
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय Unknown
Product Type RS-485/RS-422 half-duplex transceiver RS-485/RS-422 transceiver
Supply Voltage Range 3 V to 3.6 V —
Maximum Data Rate 12 Mbps —
ESD Protection (Bus Pins) +/-15 kV —
Driver / Receiver Count 1 driver, 1 receiver —
Duplex Half-duplex —
Driver Output Type Slew-rate-limited differential —
पैकेज 8-pin NSOIC (SOIC-8) 8-SOIC, 0.154 inch, 3.90 mm width
माउंटिंग प्रकार Surface mount Surface mount
Operating Supply Range 3.3 V powered, single supply —
RoHS स्थिति RoHS3 compliant —
Lead-Free Status Lead free —
Driver Protection Short-circuit current limit and thermal shutdown —
ESD Rating Reference +/-15 kV ESD-protected bus pins —
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] 0C to +70C
Quiescent Supply Current [DATA_NEEDED: quiescent supply current] —
Receiver Common-Mode Range [DATA_NEEDED: receiver common-mode voltage range] —
Unit Load / Max Nodes [DATA_NEEDED: unit load and maximum node count] —
Data Rate of Alternative MAX3485CSA+ 10 Mbps —
सप्लाई वोल्टेज — 3.3 V
डेटा दर — 10 Mbps
Duplex Mode — Half-duplex
Driver Count — 1 driver
Receiver Count — 1 receiver
Supported Standards — RS-485 and RS-422
Driver Feature — Slew-rate-limited driver family feature
Short-Circuit Protection — Short-circuit current limited driver
थर्मल शटडाउन — Driver enters high-impedance state during thermal shutdown
Receiver Feature — Fail-safe receiver input
Channel Direction — 1 transmitter and 1 receiver
ESD Protection — [DATA_NEEDED: ESD protection rating]
Receiver Input Common-Mode Range — [DATA_NEEDED: receiver input common-mode range]
सप्लाई करंट — [DATA_NEEDED: operating and quiescent supply current]
Logic Output Levels — [DATA_NEEDED: logic output voltage levels]
Termination Requirement — [DATA_NEEDED: termination and biasing requirements]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध