MAX3485ECSA+T vs MAX3485CSA+ So sánh
So sánh chi tiết song song của MAX3485ECSA+T bằng Analog Devices và MAX3485CSA+ bằng Maxim Integrated. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Analog Devices
MAX3485ECSA+T - 12Mbps 3.3V RS-485/RS-422 Transceiver | Analog Devices
MAX3485ECSA+T ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | MAX3485ECSA+T | MAX3485CSA+ |
|---|---|---|
| Thương hiệu | Analog Devices | Maxim Integrated |
| Danh mục | Interface ICs | Interface ICs |
| Trạng thái vòng đời | Hoạt động | Unknown |
| Product Type | RS-485/RS-422 half-duplex transceiver | RS-485/RS-422 transceiver |
| Supply Voltage Range | 3 V to 3.6 V | — |
| Maximum Data Rate | 12 Mbps | — |
| ESD Protection (Bus Pins) | +/-15 kV | — |
| Driver / Receiver Count | 1 driver, 1 receiver | — |
| Duplex | Half-duplex | — |
| Driver Output Type | Slew-rate-limited differential | — |
| Hộp | 8-pin NSOIC (SOIC-8) | 8-SOIC, 0.154 inch, 3.90 mm width |
| Kiểu lắp đặt | Surface mount | Surface mount |
| Operating Supply Range | 3.3 V powered, single supply | — |
| Trạng thái RoHS | RoHS3 compliant | — |
| Lead-Free Status | Lead free | — |
| Driver Protection | Short-circuit current limit and thermal shutdown | — |
| ESD Rating Reference | +/-15 kV ESD-protected bus pins | — |
| Khoảng nhiệt độ hoạt động | [DATA_NEEDED: operating temperature range] | 0C to +70C |
| Quiescent Supply Current | [DATA_NEEDED: quiescent supply current] | — |
| Receiver Common-Mode Range | [DATA_NEEDED: receiver common-mode voltage range] | — |
| Unit Load / Max Nodes | [DATA_NEEDED: unit load and maximum node count] | — |
| Data Rate of Alternative MAX3485CSA+ | 10 Mbps | — |
| Điện áp cung cấp | — | 3.3 V |
| Tốc độ dữ liệu | — | 10 Mbps |
| Duplex Mode | — | Half-duplex |
| Driver Count | — | 1 driver |
| Receiver Count | — | 1 receiver |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Feature | — | Slew-rate-limited driver family feature |
| Short-Circuit Protection | — | Short-circuit current limited driver |
| Tắt nhiệt | — | Driver enters high-impedance state during thermal shutdown |
| Receiver Feature | — | Fail-safe receiver input |
| Channel Direction | — | 1 transmitter and 1 receiver |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Receiver Input Common-Mode Range | — | [DATA_NEEDED: receiver input common-mode range] |
| Điện áp cung cấp | — | [DATA_NEEDED: operating and quiescent supply current] |
| Logic Output Levels | — | [DATA_NEEDED: logic output voltage levels] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing requirements] |