MK60DN512ZVLQ10 - K60 100MHz Cortex-M4 MCU, 512KB Flash | NXP
Référence : MK60DN512ZVLQ10 ✗ Fin de vie| Qté | Prix unitaire | Total |
|---|---|---|
| 1 | $15.62 | $15,62 |
| 10 | $14.18 | $141,80 |
| 100 | $12.4 | $1 240,00 |
| 500 | $10.85 | $5 425,00 |
| 1 000 | $9.3 | $9 300,00 |
MK60DN512ZVLQ10 Présentation
A microcontroller (MCU) is a single-chip computing system that integrates a CPU core, program and data memory, peripherals, and I/O into one IC. The K60 family belongs to the wider ARM Cortex-M4 microcontroller hierarchy -> 32-bit microcontroller -> RISC MCU -> embedded controller -> semiconductor. Cortex-M4 cores add single-precision floating-point and DSP extensions, positioning K60 parts between deterministic Cortex-M3 controllers and higher-end Cortex-M7 application processors.
Key features of the MK60DN512ZVLQ10 include 100MHz Cortex-M4 core with FPU and DSP instructions, 512KB program flash, 128KB SRAM, integrated 10/100 Ethernet MAC with IEEE 1588 timestamping, USB 2.0 Full-Speed with device/host/on-the-go, CAN, I2C, SPI, UART, 16-bit ADC, DAC, comparators, and an LCD controller. The 144-LQFP package provides extensive I/O counts for industrial human-machine interface panels.
The device operates from 1.71V to 3.6V across -40C to +105C industrial temperature range. Its 90nm low-leakage CMOS process and integrated voltage regulator permit single-supply operation with flexible power modes (Run, Wait, Stop, VLPR, VLLS). The Ethernet and USB peripherals share a sophisticated DMA fabric that offloads packet handling from the core.
Typical applications include industrial Ethernet gateways and PLCs with IEEE 1588 precision-time-protocol support, smart energy meters, building-automation controllers, USB-to-UART bridge adapters, factory automation HMI touch panels, and point-of-sale terminals. The integrated LCD controller is particularly useful for monochrome segment and dot-matrix displays in metering and appliance panels.
Designers should plan for decoupling capacitor placement per K60 hardware design guide; an external 32.768kHz crystal is recommended for RTC and the Ethernet timestamp clock. Migration from the earlier MK60DN512VLQ10 (initial silicon) to MK60DN512ZVLQ10 (current silicon) is a true drop-in replacement per NXP community thread confirmation.
This page synthesizes distributor pricing, drop-in Kinetis K60 family alternatives, and practical design notes across MCU selection, peripheral allocation, and power-mode configuration not consolidated on any single manufacturer page.
Alternatives de remplacement direct pour MK60DN512ZVLQ10 — même boîtier, compatible broche à broche. Les références à boîtier différent nécessitant une retouche du PCB sont exclues.
Variantes de cette série
Modèles de la même série directement compatibles avec MK60DN512ZVLQ10 (même facteur de forme et même empreinte) — différant par Package, ADC, USB, Operating Temperature Range, Core Architecture.
Outil de comparaison rapide — sélectionnez des références alternatives pour une comparaison côte à côte :
MK60DN512ZVLQ10R
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK60DN512VLQ10
✅ Remplacement direct✓ En stock
$9.75 / unité
Voir la fiche technique →MK60DN512ZVLQ12
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK60DN512ZVLL10
✅ Remplacement direct📋 Alternative de référence (hors catalogue)
MK40DN512ZVMD10
✅ Remplacement direct✓ En stock
$8.38 / unité
Voir la fiche technique →MK60DN512ZVLQ10 Valeurs maximales et caractéristiques électriques
| Core Architecture | ARM Cortex-M4 with FPU and DSP |
| Maximum CPU Frequency | 100 MHz |
| Program Flash Memory | 512 KB |
| SRAM | 128 KB |
| Supply Voltage Range | 1.71 V to 3.6 V |
| Plage de température de fonctionnement | -40 C to +105 C |
| Package Type | 144-LQFP (20x20 mm) |
| Ethernet MAC | 10/100 Mbps with IEEE 1588 |
| USB Controller | USB 2.0 Full-Speed, Device/Host/OTG |
| CAN Modules | 1 x CAN |
| ADC | 16-bit, multiple channels |
| DAC | 12-bit |
| Timers | Multiple FTM, PIT, LPTMR, RTC |
| Communication Peripherals | UART, SPI, I2C, I2S |
| LCD Controller | Yes (segment and dot-matrix) |
| Nombre de broches | 144 |
| Type de montage | Surface Mount |
| Niveau MSL | 3 (per JEDEC J-STD-020) |
| Statut RoHS | Compliant |
Configuration des broches de MK60DN512ZVLQ10
| Broche 1 | PTE0 — General-purpose I/O / UART1 TX |
| Broche 2 | PTE1 — General-purpose I/O / UART1 RX |
| Broche 3 | PTE2 — General-purpose I/O / SPI |
| Broche 4 | PTE3 — General-purpose I/O / SPI |
| Broche 5 | PTE4 — General-purpose I/O / SPI |
| Broche 6 | PTE5 — General-purpose I/O / SPI |
| Broche 7 | PTE6 — General-purpose I/O / I2C |
| Broche 8 | PTE7 — General-purpose I/O / I2C |
| Broche 9 | VSS — Ground |
| Broche 10 | USB0_DP — USB 2.0 Full-Speed data plus |
| Broche 11 | USB0_DM — USB 2.0 Full-Speed data minus |
| Broche 12 | USB0_VBUS — USB VBUS detect |
| Broche 13 | VREGIN — Voltage regulator input (1.71V to 3.6V) |
| Broche 14 | VDD — Digital supply |
| Broche 15 | VSS — Ground |
| Broche 16 | PTA0 — JTAG TCLK / SWD CLK |
| Broche 17 | PTA1 — JTAG TDI |
| Broche 18 | PTA2 — JTAG TDO / SWD IO |
| Broche 19 | PTA3 — JTAG TMS / SWD DIO |
| Broche 20 | PTA4 — General-purpose I/O / NMI |
| Broche 21 | PTA5 — General-purpose I/O |
| Broche 22 | PTA6 — General-purpose I/O |
| Broche 23 | PTA7 — General-purpose I/O |
| Broche 24 | PTA8 — General-purpose I/O |
| Broche 25 | PTA9 — General-purpose I/O |
| Broche 26 | PTA10 — General-purpose I/O |
| Broche 27 | PTA11 — General-purpose I/O |
| Broche 28 | PTA12 — General-purpose I/O |
| Broche 29 | PTA13 — General-purpose I/O |
| Broche 30 | PTA14 — General-purpose I/O |
| Broche 31 | PTA15 — General-purpose I/O |
| Broche 32 | PTA16 — General-purpose I/O |
| Broche 33 | PTA17 — General-purpose I/O |
| Broche 34 | PTA18 — General-purpose I/O / EXTAL |
| Broche 35 | PTA19 — General-purpose I/O / XTAL |
| Broche 36 | VDD — Digital supply |
| Broche 37 | VSS — Ground |
| Broche 38 | PTB0 — ADC channel / general I/O |
| Broche 39 | PTB1 — ADC channel / general I/O |
| Broche 40 | PTB2 — ADC channel / general I/O |
| Broche 41 | PTB3 — ADC channel / general I/O |
| Broche 42 | PTB4 — General-purpose I/O |
| Broche 43 | PTB5 — General-purpose I/O |
| Broche 44 | PTB6 — General-purpose I/O |
| Broche 45 | PTB7 — General-purpose I/O |
| Broche 46 | PTB8 — General-purpose I/O |
| Broche 47 | PTB9 — General-purpose I/O |
| Broche 48 | PTB10 — General-purpose I/O |
| Broche 49 | PTB11 — General-purpose I/O |
| Broche 50 | PTB12 — General-purpose I/O |
| Broche 51 | PTB13 — General-purpose I/O |
| Broche 52 | PTB14 — General-purpose I/O |
| Broche 53 | PTB15 — General-purpose I/O |
| Broche 54 | PTB16 — General-purpose I/O / UART0 RX |
| Broche 55 | PTB17 — General-purpose I/O / UART0 TX |
| Broche 56 | PTB18 — CAN TX |
| Broche 57 | PTB19 — CAN RX |
| Broche 58 | PTC0 — General-purpose I/O |
| Broche 59 | PTC1 — General-purpose I/O |
| Broche 60 | PTC2 — General-purpose I/O |
| Broche 61 | PTC3 — General-purpose I/O |
| Broche 62 | PTC4 — General-purpose I/O |
| Broche 63 | PTC5 — General-purpose I/O |
| Broche 64 | PTC6 — General-purpose I/O |
| Broche 65 | PTC7 — General-purpose I/O |
| Broche 66 | PTC8 — General-purpose I/O |
| Broche 67 | PTC9 — General-purpose I/O |
| Broche 68 | PTC10 — General-purpose I/O |
| Broche 69 | PTC11 — General-purpose I/O |
| Broche 70 | PTC12 — General-purpose I/O |
| Broche 71 | PTC13 — General-purpose I/O |
| Broche 72 | PTC14 — General-purpose I/O |
| Broche 73 | PTC15 — General-purpose I/O |
| Broche 74 | PTC16 — General-purpose I/O |
| Broche 75 | PTC17 — General-purpose I/O |
| Broche 76 | VDD — Digital supply |
| Broche 77 | VSS — Ground |
| Broche 78 | PTD0 — General-purpose I/O |
| Broche 79 | PTD1 — General-purpose I/O |
| Broche 80 | PTD2 — General-purpose I/O |
| Broche 81 | PTD3 — General-purpose I/O |
| Broche 82 | PTD4 — General-purpose I/O |
| Broche 83 | PTD5 — General-purpose I/O |
| Broche 84 | PTD6 — General-purpose I/O |
| Broche 85 | PTD7 — General-purpose I/O |
| Broche 86 | PTD8 — General-purpose I/O |
| Broche 87 | PTD9 — General-purpose I/O |
| Broche 88 | PTD10 — General-purpose I/O |
| Broche 89 | PTD11 — General-purpose I/O |
| Broche 90 | PTD12 — General-purpose I/O |
| Broche 91 | PTD13 — General-purpose I/O |
| Broche 92 | PTD14 — General-purpose I/O |
| Broche 93 | PTD15 — General-purpose I/O |
| Broche 94 | PTD16 — General-purpose I/O |
| Broche 95 | PTD17 — General-purpose I/O |
| Broche 96 | PTD18 — General-purpose I/O |
| Broche 97 | PTD19 — General-purpose I/O |
| Broche 98 | PTD20 — General-purpose I/O |
| Broche 99 | PTD21 — General-purpose I/O |
| Broche 100 | PTD22 — General-purpose I/O |
| Broche 101 | PTD23 — General-purpose I/O |
| Broche 102 | PTD24 — General-purpose I/O |
| Broche 103 | PTD25 — General-purpose I/O |
| Broche 104 | PTD26 — General-purpose I/O |
| Broche 105 | PTD27 — General-purpose I/O |
| Broche 106 | PTD28 — General-purpose I/O |
| Broche 107 | PTD29 — General-purpose I/O |
| Broche 108 | PTD30 — General-purpose I/O |
| Broche 109 | PTD31 — General-purpose I/O |
| Broche 110 | PTE8 — General-purpose I/O |
| Broche 111 | PTE9 — General-purpose I/O |
| Broche 112 | PTE10 — General-purpose I/O |
| Broche 113 | PTE11 — General-purpose I/O |
| Broche 114 | PTE12 — General-purpose I/O |
| Broche 115 | PTE13 — General-purpose I/O |
| Broche 116 | PTE14 — General-purpose I/O |
| Broche 117 | PTE15 — General-purpose I/O |
| Broche 118 | PTE16 — General-purpose I/O |
| Broche 119 | PTE17 — General-purpose I/O |
| Broche 120 | PTE18 — General-purpose I/O |
| Broche 121 | PTE19 — General-purpose I/O |
| Broche 122 | PTE20 — General-purpose I/O |
| Broche 123 | PTE21 — General-purpose I/O |
| Broche 124 | PTE22 — General-purpose I/O |
| Broche 125 | PTE23 — General-purpose I/O |
| Broche 126 | PTE24 — General-purpose I/O |
| Broche 127 | PTE25 — General-purpose I/O |
| Broche 128 | PTE26 — General-purpose I/O |
| Broche 129 | PTE27 — General-purpose I/O |
| Broche 130 | PTE28 — General-purpose I/O |
| Broche 131 | PTE29 — General-purpose I/O |
| Broche 132 | PTE30 — General-purpose I/O |
| Broche 133 | PTE31 — General-purpose I/O |
| Broche 134 | VDD — Digital supply |
| Broche 135 | VSS — Ground |
| Broche 136 | RTC_XTAL32 — 32.768 kHz crystal input |
| Broche 137 | RTC_XTAL32B — 32.768 kHz crystal output |
| Broche 138 | VBAT — RTC battery supply |
| Broche 139 | RESET_b — Reset input (active low) |
| Broche 140 | TPM_CLKIN0 — Timer clock input |
| Broche 141 | ETH_RMII_MDC — Ethernet RMII management clock |
| Broche 142 | ETH_RMII_MDIO — Ethernet RMII management data |
| Broche 143 | ETH_RMII_CRS_DV — Ethernet RMII carrier sense / data valid |
| Broche 144 | ETH_RMII_RX_ER — Ethernet RMII receive error |
Applications typiques
MK60DN512ZVLQ10 convient pour 6 applications: Industrial Ethernet Gateway with IEEE 1588, USB-to-UART Bridge and Field Service Tool, Smart Energy Meter and Data Concentrator, Building Automation Controller, Human-Machine Interface Touch Panel, Point-of-Sale Terminal with Ethernet.
Industrial Ethernet Gateway with IEEE 1588
The MK60DN512ZVLQ10 is well-suited for industrial Ethernet gateways requiring IEEE 1588 precision time protocol support because it integrates a hardware 1588-capable 10/100 Ethernet MAC plus a 100MHz Cortex-M4 core for protocol processing. At 100MHz with 128KB SRAM the part can run lightweight TCP/IP stacks, process Modbus TCP, and manage VLAN tagging without external memory. The Ethernet DMA offloads packet handling from the core, freeing CPU cycles for application logic. Place a 25MHz oscillator near the ETH_RMII pins, isolate PHY clock domain with a series resistor, and use the integrated PTP timer for sub-microsecond timestamp accuracy across smart-grid and factory-automation deployments.
Recommandé
USB-to-UART Bridge and Field Service Tool
The MK60DN512ZVLQ10's integrated USB 2.0 Full-Speed with device, host, and OTG support enables field-service USB bridges that connect legacy RS-485 or RS-232 industrial equipment to modern USB hosts and tablets. The 100MHz Cortex-M4 delivers sufficient throughput for UART baud rates up to 3 Mbaud with hardware DMA on both USB and UART endpoints. Pair the MCU with a USBLC6-2SC6 ESD array on the USB data lines and a MAX3232 for RS-232 level translation. This combination is well-suited for portable diagnostic tools that enumerate as USB CDC devices on host PCs and tablets without external PHY chips.
Recommandé
Smart Energy Meter and Data Concentrator
The MK60DN512ZVLQ10 suits smart electricity, water, and gas meters that need to log consumption, drive a segment LCD, and forward data over Ethernet or PLC. Its integrated LCD controller drives 4x40 segment displays directly without external drivers, while the 16-bit ADC samples current and voltage channels for Class 0.2 metrology accuracy. The 128KB SRAM buffers time-stamped logs across network outages, and the 512KB flash stores calibration tables and DLMS/COSEM protocol stacks. Its -40C to +105C industrial temperature range supports outdoor metering cabinets, and its low-power VLLS mode drops consumption below 5uA for battery-backed installations.
Recommandé
Building Automation Controller
The MK60DN512ZVLQ10 fits building-automation controllers managing HVAC, lighting, and access-control subsystems on a single board. Its rich peripheral set integrates CAN for BACnet, UARTs for Modbus RTU devices, and Ethernet for BACnet/IP and MQTT cloud connectivity without external bridges. The 512KB flash accommodates full BACnet stacks plus custom automation logic, while the FTM timers generate PWM signals for valve and damper actuators. Pin-compatibility with the K60 family simplifies expansion card reuse across controller variants. Add TVS diodes on field wiring and isolated CAN transceivers for industrial surge immunity.
Recommandé
Human-Machine Interface Touch Panel
For HMI panels with monochrome LCD plus touch input, the MK60DN512ZVLQ10 combines LCD controller, ADC for resistive touch sensing, and Ethernet for cloud connectivity in a single chip. The integrated LCD controller supports up to 320 segment pins, ideal for dot-matrix industrial displays up to 320x240 monochrome. SPI drives an external capacitive touch controller over short flex cables. The 100MHz core renders custom icons at acceptable frame rates. Boot from internal flash for code-only systems, or use a serial flash for asset graphics while keeping firmware updates simple.
Recommandé
Point-of-Sale Terminal with Ethernet
The MK60DN512ZVLQ10's combination of Ethernet, USB host, and LCD controller enables compact point-of-sale terminals that handle barcode scanning, receipt printing, and encrypted transaction logging. The 512KB flash stores TLS libraries plus application logic, and the hardware AES accelerator encrypts cardholder data without burdening the CPU. The integrated USB host stack supports HID barcode scanners, USB receipt printers, and customer-facing displays. Run main code from internal flash and store audit trails to an SD card over SPI, with the Ethernet MAC handling real-time authorizations against backend payment networks.
Recommandé
Récapitulatif des produits recommandés
Données de référence d'ingénierie pour MK60DN512ZVLQ10 — comparaison, recommandations de conception et informations de conformité.
Guide de sélection
Comparaison avec les alternatives
| Paramètre | Ce produit | MK60DN512ZVLQ10R | MK60DN512VLQ10 | MK60DN512ZVLQ12 | MK60DN512ZVLL10 | MK40DN512ZVMD10 |
|---|---|---|---|---|---|---|
| Package | 144-LQFP (20x20) | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 144-LQFP (20x20) - same | 100-LQFP - smaller | 144-LQFP - same |
| Brand | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors | NXP Semiconductors |
| Core | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz | Cortex-M4 100MHz |
| Flash | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB | 512 KB |
| SRAM | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB | 128 KB |
| Ethernet MAC | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | 10/100 with 1588 | None - no Ethernet |
| USB | USB 2.0 FS Device/Host/OTG | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS | USB 2.0 FS |
| Operating Temperature | -40C to +105C | -40C to +105C | -40C to +105C | -40C to +125C | -40C to +105C | -40C to +105C |
| Pin Count | 144 | 144 | 144 | 144 | 100 | 144 |
| Lifecycle | NRND | NRND | NRND | Active | NRND | NRND |
Principaux différenciateurs
- Integrated IEEE 1588 hardware timestamping (vs MK40DN512ZVMD10)
- 128KB SRAM for industrial stacks (vs STM32F1 series equivalent)
- Industrial -40C to +105C temperature rating (vs MK60DN512ZVLQ12 equivalent)
- Cortex-M4 with FPU and DSP (vs Cortex-M3 alternative)
Notes de conception
The 144-LQFP package at 100MHz dissipates up to ~300mW typical and ~700mW peak during sustained Ethernet packet processing. The package theta_JA is approximately 50C/W on a 4-layer JEDEC test board. For enclosed industrial cabinets above 60C ambient, attach a small thermal pad or copper pour on the top of the package to keep the junction below 105C rated limit, especially during ULPS or sustained USB host enumeration.
Place a 100nF decoupling capacitor within 3mm of each VDD pin and a single 10uF bulk capacitor near the VREGIN pin. The Ethernet RMII traces must be length-matched within 50 mils; route them on the top layer over a continuous ground plane and keep series termination resistors within 5mm of the MCU pins. USB DP/DM traces should be 45 ohms differential with no stubs and length-matched within 150 mils of each other.
Do not confuse MK60DN512ZVLQ10 (current production silicon) with MK60DN512VLQ10 (initial silicon) - both are pin-compatible but the Z-suffix is recommended for new designs. The 144-LQFP package has a center thermal pad that must be soldered to the ground plane for electrical and thermal performance; omit at your own risk. The PTP timestamp function requires a 50ppm or better crystal reference on EXTAL. JTAG pins PTA0-PTA3 are 5V-tolerant only when the MCU is not powered - never drive them above VDD+0.3V during operation.
Informations de conformité
RoHS and REACH compliant per NXP product page. Not AEC-Q100 qualified - industrial grade only. Not recommended for new designs (NRND); minimum longevity commitments honored per NXP policy.
