MP3H6115A6T1 vs MP3H6115A6U Comparaison
Comparaison détaillée côte à côte de MP3H6115A6T1 par NXP Semiconductors et MP3H6115A6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MP3H6115A6T1 | MP3H6115A6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $4,10 | $4,85 |
| Pressure Type | Absolute | — |
| Operating Pressure Range | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) | — |
| Type de sortie | Analog voltage, ratiometric | Analog, ratiometric |
| Plage de tension de sortie | 0.12 V to 2.8 V (at Vdd = 3.0 V) | 0.12 V to 2.8 V |
| Tension d'alimentation | 3.0 V typical | 3 V |
| Courant d'alimentation | [DATA_NEEDED: supply current typical mA] | — |
| Plage de température de fonctionnement | -40 C to +125 C | — |
| Compensated Temperature Range | -40 C to +125 C | — |
| Pressure Port | Male - 0.13 inch (3.3 mm) tube | Male - 0.13 inch (3.3 mm) tube |
| Boîtier | 8-SOIC (0.295 inch, 7.50 mm width) | 8-SOIC (SOP-8), 0.295 inch / 7.50 mm body width |
| Type de montage | Surface Mount | Surface Mount |
| Sensor Technology | MEMS piezo-resistive with on-chip bipolar op-amp | — |
| On-Chip Signal Conditioning | Yes (amplifier + temperature compensation + thin-film resistor network) | — |
| Output Type Detail | Ratiometric to Vdd | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| Type de capteur | — | Absolute pressure sensor |
| Pressure Range | — | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure | — | 15 kPa ~ 115 kPa |
| Accuracy | — | High accuracy at high temperature (per datasheet) |
| Temperature Compensation | — | -40 C to +125 C |
| Technology | — | Piezoresistive (MEMS) with bipolar signal conditioning |
| Signal Conditioning | — | On-chip bipolar op-amp and thin-film resistor network |
| Output Ratiometric | — | Yes (output proportional to VDD) |
| Température de fonctionnement | — | -40 C to +125 C |
| Package Material | — | Durable thermoplastic (PPS) surface-mount package |