MPX2053DP vs MPX2010DP Comparaison
Comparaison détaillée côte à côte de MPX2053DP par NXP Semiconductors et MPX2010DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX2053DP - 50 kPa Differential Pressure Sensor | NXP | 4-SIP Module
MPX2053DP ✓ ActifComparaison des spécifications
| Paramètre | MPX2053DP | MPX2010DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $12,95 | $8,50 |
| Pressure Type | Differential | — |
| Operating Pressure Range | 0 kPa to 50 kPa (0 PSI to 7.25 PSI) | — |
| Sensitivity | 0.8 mV/kPa (typical) | — |
| Full-Scale Span (10 V supply) | 0 mV to 40 mV | — |
| Type de sortie | Analog voltage, ratiometric | Analog voltage, Wheatstone bridge (mV level) |
| Tension d'alimentation | 10 V typical, 16 V maximum | 10 V DC typical (max 16 V) |
| Maximum Offset | ±1.0 mV | — |
| Response Time | 1.0 ms (typical) | 1.0 ms (typical) |
| Température de fonctionnement | 0 °C to +85 °C | -40 °C to +125 °C |
| Port Configuration | Dual barbed ports, 0.19 in (4.93 mm) tube | Dual ports (differential), 0.19 inch / 4.93 mm tubes |
| Boîtier / Format | 4-SIP Module (Case 344-15) | — |
| Type de montage | Through-hole, PCB mount | — |
| Technology | Silicon piezoresistive MEMS, on-chip temperature compensated | Piezoresistive (silicon strain gauge bridge) |
| Statut RoHS | Compliant | Compliant |
| Lead-Free | Yes | — |
| Type de capteur | — | Differential Pressure Sensor |
| Pressure Range | — | 0 to 10 kPa (0 to 1.45 PSI) |
| Typical Full-Scale Span | — | 25 mV at 10 V excitation |
| Zero Pressure Offset | — | 0 mV nominally (±1.0 mV max) |
| Linearity | — | ±0.05% (typ) |
| Temperature Compensation | — | 0 °C to +85 °C (on-chip) |
| Maximum Overpressure | — | 75 kPa |
| Burst Pressure | — | 200 kPa |
| Package / Mounting | — | 4-SIP Module (through-hole with axial tubes) |
| Media Compatibility | — | Dry air or non-corrosive gas |