MPX2102A vs MPX2102D Comparaison
Comparaison détaillée côte à côte de MPX2102A par NXP Semiconductors et MPX2102D par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteNXP Semiconductors
MPX2102D - 100kPa Differential Pressure Sensor | NXP | 4-SIP Module
MPX2102D ObsoleteComparaison des spécifications
| Paramètre | MPX2102A | MPX2102D |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Obsolete | Obsolete |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,95 | $13,10 |
| Pressure Type | Absolute | Differential |
| Operating Pressure Range | 20 kPa to 100 kPa | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Type de sortie | Analog voltage (Wheatstone bridge, differential) | Wheatstone Bridge (Analog Voltage) |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Plage de température de fonctionnement | -40C to +125C | — |
| Boîtier / Format | 4-SIP Module (Case 344-15), through-hole | 4-SIP Module |
| Type de montage | Through-Hole (SIP) | Through Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | Piezoresistive Silicon MEMS |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | — |
| Statut RoHS | Compliant (per NXP product page) | — |
| Niveau MSL | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Operating Pressure | — | 14.5 PSI (100 kPa) |
| Tension de sortie | — | 0 mV to 40 mV (at 10 V supply) |
| Tension d'alimentation | — | 10 V typical |
| Port Size | — | Female, 0.136 in (3.4544 mm) |
| Termination Style | — | Through-Hole PCB |
| Applications | — | Board Mount |
| Température de fonctionnement | — | -40 C to +125 C (per NXP MPX2102 series datasheet) |
| Compensated Temperature | — | 0 C to +85 C |
| Housing / Body Style | — | Unibody Plastic (Round) |
| Series | — | MPX2102 |
| Packaging | — | Tray |
| Product Status | — | Obsolete (per distributor listings) |