MPX2102A vs MPX2102D 비교
다음의 상세 나란히 비교: MPX2102A 제조: NXP Semiconductors 및 MPX2102D 제조: NXP Semiconductors. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteNXP Semiconductors
MPX2102D - 100kPa Differential Pressure Sensor | NXP | 4-SIP Module
MPX2102D Obsolete사양 비교
| 파라미터 | MPX2102A | MPX2102D |
|---|---|---|
| 브랜드 | NXP Semiconductors | NXP Semiconductors |
| 카테고리 | Pressure Sensors | Pressure Sensors |
| 수명 주기 상태 | Obsolete | Obsolete |
| 재고 상태 | In Stock | In Stock |
| 단가 (USD) | $10.95 | $13.10 |
| Pressure Type | Absolute | Differential |
| Operating Pressure Range | 20 kPa to 100 kPa | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| 출력 유형 | Analog voltage (Wheatstone bridge, differential) | Wheatstone Bridge (Analog Voltage) |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| 동작 온도 범위 | -40C to +125C | — |
| 패키지 / 케이스 | 4-SIP Module (Case 344-15), through-hole | 4-SIP Module |
| 실장 유형 | Through-Hole (SIP) | Through Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | Piezoresistive Silicon MEMS |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | — |
| RoHS 상태 | Compliant (per NXP product page) | — |
| MSL 레벨 | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Operating Pressure | — | 14.5 PSI (100 kPa) |
| 출력 전압 | — | 0 mV to 40 mV (at 10 V supply) |
| 공급 전압 | — | 10 V typical |
| Port Size | — | Female, 0.136 in (3.4544 mm) |
| Termination Style | — | Through-Hole PCB |
| Applications | — | Board Mount |
| 동작 온도 | — | -40 C to +125 C (per NXP MPX2102 series datasheet) |
| Compensated Temperature | — | 0 C to +85 C |
| Housing / Body Style | — | Unibody Plastic (Round) |
| Series | — | MPX2102 |
| Packaging | — | Tray |
| Product Status | — | Obsolete (per distributor listings) |