MPX2102A vs MPX2102D Perbandingan
Perbandingan bersamaan detil MPX2102A dari NXP Semiconductors dan MPX2102D dari NXP Semiconductors. Bandingkan spesifikasi penting, parameter listrik, pengemasan, status cycle, harga, dan ketersediaan untuk menentukan komponen terbaik untuk kebutuhan desain Anda.
NXP Semiconductors
MPX2102A - 100 kPa Absolute Pressure Sensor | NXP Semiconductors
MPX2102A ObsoleteNXP Semiconductors
MPX2102D - 100kPa Differential Pressure Sensor | NXP | 4-SIP Module
MPX2102D ObsoletePerbandingan Spesifikasi
| Parameter Umum | MPX2102A | MPX2102D |
|---|---|---|
| Merek | NXP Semiconductors | NXP Semiconductors |
| Kategori | Pressure Sensors | Pressure Sensors |
| Status Lingkungan Hidup | Obsolete | Obsolete |
| Pressure Type | Absolute | Differential |
| Operating Pressure Range | 20 kPa to 100 kPa | — |
| Maximum Overpressure | [DATA_NEEDED: maximum overpressure rating] | — |
| Tipe Output | Analog voltage (Wheatstone bridge, differential) | Wheatstone Bridge (Analog Voltage) |
| Output Span | 0 mV to 40 mV at 10 V supply | — |
| Supply Voltage (Excitation) | 10 V typical | — |
| Pressure Linearity | [DATA_NEEDED: % of full scale - verify in datasheet] | — |
| Rentang Suhu Kerja | -40C to +125C | — |
| Paket / Case | 4-SIP Module (Case 344-15), through-hole | 4-SIP Module |
| Tipe Mounting | Through-Hole (SIP) | Through Hole |
| Port Style | Barbed pressure port (axial) | — |
| Technology | Silicon piezoresistive (MEMS) with on-chip thin-film compensation | Piezoresistive Silicon MEMS |
| Temperature Compensation | On-chip (laser trimmed) -40C to +125C | — |
| Bridge Resistance | [DATA_NEEDED: input/output bridge resistance] | — |
| Response Time | [DATA_NEEDED: response time in ms] | — |
| Status RoHS | Compliant (per NXP product page) | — |
| Level MSL | Not applicable (through-hole, no moisture sensitivity rating) | — |
| Operating Pressure | — | 14.5 PSI (100 kPa) |
| Tegangan Output | — | 0 mV to 40 mV (at 10 V supply) |
| Tegangan Pemuat | — | 10 V typical |
| Port Size | — | Female, 0.136 in (3.4544 mm) |
| Termination Style | — | Through-Hole PCB |
| Applications | — | Board Mount |
| Suhu Kerja | — | -40 C to +125 C (per NXP MPX2102 series datasheet) |
| Compensated Temperature | — | 0 C to +85 C |
| Housing / Body Style | — | Unibody Plastic (Round) |
| Series | — | MPX2102 |
| Packaging | — | Tray |
| Product Status | — | Obsolete (per distributor listings) |