MPX5100D vs MPX5100DP Comparaison
Comparaison détaillée côte à côte de MPX5100D par NXP Semiconductors et MPX5100DP par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
NXP Semiconductors
MPX5100D - 100 kPa Differential Pressure Sensor | NXP Semiconductors
MPX5100D ✓ ActifNXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ ActifComparaison des spécifications
| Paramètre | MPX5100D | MPX5100DP |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,75 | $12,03 |
| Type de capteur | Piezoresistive Pressure Sensor (Differential) | — |
| Pressure Range | 0 kPa to 100 kPa (0 PSI to 14.5 PSI) | — |
| Pressure Type | Differential | Differential |
| Tension d'alimentation | 4.75 V to 5.25 V | — |
| Courant d'alimentation | [DATA_NEEDED: Supply Current] | — |
| Full-Scale Span | 45 mV/kPa typical | — |
| Type de sortie | Analog Voltage, Ratiometric | Analog, ratiometric to Vcc |
| Plage de tension de sortie | 0.2 V (zero pressure) to 4.7 V (full-scale) | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) |
| Accuracy | ±1.8 %VFSS maximum | ±2.5% (0 to 85 °C) |
| Température de fonctionnement | -40 °C to +125 °C | -40 °C to +125 °C |
| Pressure Port | Dual axial tube ports (Differential), 0.19 inch (4.93 mm) | — |
| Boîtier | 6-SIP Module (Case 867) | 6-SIP Module (through-hole) |
| Type de montage | Through-Hole | Through-Hole (SIP) |
| Output Response Time | [DATA_NEEDED: Response Time] | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Reflow Compatible | No (through-hole module) | — |
| Media Compatibility | Non-corrosive dry gases (filtered dry air recommended) | — |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 to 14.5 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | — | 5 V (nominal) |
| Sensitivity | — | 45 mV/kPa nominal |
| Response Bandwidth | — | 1 kHz (typical) |
| Port Configuration | — | Dual ports, male 0.19" (4.93 mm) tube, same side |
| Signal Conditioning | — | On-chip amplifier, temperature compensation, calibration |
| Technology | — | Piezoresistive MEMS with bipolar ASIC |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |