MPX5100D vs MPX5100DP 比較
詳細な並列比較: MPX5100D メーカー: NXP Semiconductors および MPX5100DP メーカー: NXP Semiconductors。主要仕様、電気的特性、パッケージ、ライフサイクルステータス、価格、在庫状況を比較して、設計要件に最適な部品を判断してください。
NXP Semiconductors
MPX5100D - 100 kPa Differential Pressure Sensor | NXP Semiconductors
MPX5100D ✓ 生産中仕様比較
| パラメータ | MPX5100D | MPX5100DP |
|---|---|---|
| ブランド | NXP Semiconductors | NXP Semiconductors |
| カテゴリ | Pressure Sensors | Pressure Sensors |
| ライフサイクル状態 | 有効 | 有効 |
| 在庫状況 | In Stock | In Stock |
| 単価（USD） | $10.75 | $12.03 |
| センサタイプ | Piezoresistive Pressure Sensor (Differential) | — |
| Pressure Range | 0 kPa to 100 kPa (0 PSI to 14.5 PSI) | — |
| Pressure Type | Differential | Differential |
| 電源電圧 | 4.75 V to 5.25 V | — |
| 電源電流 | [DATA_NEEDED: Supply Current] | — |
| Full-Scale Span | 45 mV/kPa typical | — |
| 出力タイプ | Analog Voltage, Ratiometric | Analog, ratiometric to Vcc |
| 出力電圧範囲 | 0.2 V (zero pressure) to 4.7 V (full-scale) | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) |
| Accuracy | ±1.8 %VFSS maximum | ±2.5% (0 to 85 °C) |
| 動作温度 | -40 °C to +125 °C | -40 °C to +125 °C |
| Pressure Port | Dual axial tube ports (Differential), 0.19 inch (4.93 mm) | — |
| パッケージ | 6-SIP Module (Case 867) | 6-SIP Module (through-hole) |
| 実装タイプ | Through-Hole | Through-Hole (SIP) |
| Output Response Time | [DATA_NEEDED: Response Time] | — |
| RoHS ステータス | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Reflow Compatible | No (through-hole module) | — |
| Media Compatibility | Non-corrosive dry gases (filtered dry air recommended) | — |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 to 14.5 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | — | 5 V (nominal) |
| Sensitivity | — | 45 mV/kPa nominal |
| Response Bandwidth | — | 1 kHz (typical) |
| Port Configuration | — | Dual ports, male 0.19" (4.93 mm) tube, same side |
| Signal Conditioning | — | On-chip amplifier, temperature compensation, calibration |
| Technology | — | Piezoresistive MEMS with bipolar ASIC |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |