MPX5100D vs MPX5100DP Vergleich
Detaillierter Direktvergleich von MPX5100D von NXP Semiconductors und MPX5100DP von NXP Semiconductors. Vergleichen Sie die wichtigsten Spezifikationen, elektrischen Parameter, Gehäuse, Lebenszyklusstatus, Preise und Verfügbarkeit, um das beste Bauteil für Ihre Designanforderungen zu ermitteln.
NXP Semiconductors
MPX5100D - 100 kPa Differential Pressure Sensor | NXP Semiconductors
MPX5100D ✓ AktivNXP Semiconductors
MPX5100DP - 0-100kPa Differential Pressure Sensor 5V 6-SIP | NXP
MPX5100DP ✓ AktivSpezifikationsvergleich
| Parameter | MPX5100D | MPX5100DP |
|---|---|---|
| Marke | NXP Semiconductors | NXP Semiconductors |
| Kategorie | Pressure Sensors | Pressure Sensors |
| Lebenszyklusstatus | Aktiv | Aktiv |
| Lagerstatus | In Stock | In Stock |
| Stückpreis (USD) | $10,75 | $12,03 |
| Sensortyp | Piezoresistive Pressure Sensor (Differential) | — |
| Pressure Range | 0 kPa to 100 kPa (0 PSI to 14.5 PSI) | — |
| Pressure Type | Differential | Differential |
| Versorgungsspannung | 4.75 V to 5.25 V | — |
| Versorgungsstrom | [DATA_NEEDED: Supply Current] | — |
| Full-Scale Span | 45 mV/kPa typical | — |
| Ausgangstyp | Analog Voltage, Ratiometric | Analog, ratiometric to Vcc |
| Ausgangsspannungsbereich | 0.2 V (zero pressure) to 4.7 V (full-scale) | 0.2 V to 4.7 V (ratiometric, ~4.5 V span) |
| Accuracy | ±1.8 %VFSS maximum | ±2.5% (0 to 85 °C) |
| Betriebstemperatur | -40 °C to +125 °C | -40 °C to +125 °C |
| Pressure Port | Dual axial tube ports (Differential), 0.19 inch (4.93 mm) | — |
| Gehäuse | 6-SIP Module (Case 867) | 6-SIP Module (through-hole) |
| Montageart | Through-Hole | Through-Hole (SIP) |
| Output Response Time | [DATA_NEEDED: Response Time] | — |
| RoHS-Status | Compliant | [DATA_NEEDED: RoHS compliance status] |
| Reflow Compatible | No (through-hole module) | — |
| Media Compatibility | Non-corrosive dry gases (filtered dry air recommended) | — |
| Operating Pressure Range | — | 0 kPa to 100 kPa (0 to 14.5 PSI) |
| Maximum Overload Pressure | — | [DATA_NEEDED: maximum overload pressure] |
| Supply Voltage (Vcc) | — | 5 V (nominal) |
| Sensitivity | — | 45 mV/kPa nominal |
| Response Bandwidth | — | 1 kHz (typical) |
| Port Configuration | — | Dual ports, male 0.19" (4.93 mm) tube, same side |
| Signal Conditioning | — | On-chip amplifier, temperature compensation, calibration |
| Technology | — | Piezoresistive MEMS with bipolar ASIC |
| Lead-Free | — | [DATA_NEEDED: lead-free status] |