MPXAZ6115A7U vs MPXA6115AC6U Comparaison
Comparaison détaillée côte à côte de MPXAZ6115A7U par NXP Semiconductors et MPXA6115AC6U par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | MPXAZ6115A7U | MPXA6115AC6U |
|---|---|---|
| Marque | NXP Semiconductors | NXP Semiconductors |
| Catégorie | Pressure Sensors | Pressure Sensors |
| Statut du cycle de vie | Actif | Actif |
| Statut du stock | In Stock | In Stock |
| Prix unitaire (USD) | $10,10 | $9,95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| Type de sortie | Analog Voltage | Analog, ratiometric |
| Plage de tension de sortie | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| Tension d'alimentation | 5.0 V typical | 4.75 V to 5.25 V |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 45.9 mV/kPa (typical) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% (0°C to +85°C) |
| Température de fonctionnement | -40C to +125C | -40°C to +125°C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Single axial top port, 0.13" (3.17 mm) tube |
| Boîtier / Format | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| Type de montage | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp, temperature compensated |
| Temperature Compensation | On-chip, factory calibrated | — |
| Statut RoHS | Compliant | Compliant |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum over pressure rating] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current typical] |
| Response Time | — | 1.0 ms (typical) |
| Boîtier | — | 8-SMD, Gull Wing (Case 1320-02, SOP-8) |
| Element Type | — | Piezoresistive MEMS silicon |