MPXAZ6115A7U vs MPXA6115AC6U 对比
详细并排对比 MPXAZ6115A7U 出自 NXP Semiconductors 和 MPXA6115AC6U 出自 NXP Semiconductors。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
规格对比
| 参数 | MPXAZ6115A7U | MPXA6115AC6U |
|---|---|---|
| 品牌 | NXP Semiconductors | NXP Semiconductors |
| 分类 | Pressure Sensors | Pressure Sensors |
| 生命周期状态 | 有效 | 有效 |
| 库存状态 | 有库存 | 有库存 |
| 单价（USD） | $10.10 | $9.95 |
| Pressure Type | Absolute | Absolute |
| Operating Pressure Range | 2.18 PSI to 16.68 PSI (15 kPa to 115 kPa) | 15 kPa to 115 kPa (2.18 PSI to 16.68 PSI) |
| Operating Pressure Min | 15 kPa | — |
| Operating Pressure Max | 115 kPa | — |
| 输出类型 | Analog Voltage | Analog, ratiometric |
| 输出电压范围 | 0.2 V to 4.7 V | 0.2 V to 4.7 V (at 5 V supply) |
| 电源电压 | 5.0 V typical | 4.75 V to 5.25 V |
| Sensitivity | [DATA_NEEDED: typical sensitivity mV/kPa] | 45.9 mV/kPa (typical) |
| Accuracy | ±1.5% (0C to 85C, after NXP factory calibration) | ±1.5% (0°C to +85°C) |
| 工作温度 | -40C to +125C | -40°C to +125°C |
| Port Style | Top axial tube, 0.13" (3.17 mm) diameter | Single axial top port, 0.13" (3.17 mm) tube |
| 封装 / 外壳 | 8-DIP Module (0.560 inch, 14.22 mm) | — |
| 安装类型 | Through-Hole | Surface Mount |
| Media Compatibility | Non-corrosive dry gases (media resistant) | — |
| Signal Conditioning | On-chip bipolar op-amp + thin-film resistor network | On-chip bipolar op-amp, temperature compensated |
| Temperature Compensation | On-chip, factory calibrated | — |
| RoHS 状态 | Compliant | Compliant |
| Maximum Over Pressure | — | [DATA_NEEDED: maximum over pressure rating] |
| 电源电流 | — | [DATA_NEEDED: supply current typical] |
| Response Time | — | 1.0 ms (typical) |
| 封装 | — | 8-SMD, Gull Wing (Case 1320-02, SOP-8) |
| Element Type | — | Piezoresistive MEMS silicon |