PCA9554PW vs PCA9534APW Comparaison
Comparaison détaillée côte à côte de PCA9554PW par NXP Semiconductors et PCA9534APW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCA9554PW | PCA9534APW |
|---|---|---|
| Marque | NXP Semiconductors | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | 8-bit I2C/SMBus I/O expander with interrupt | — |
| Number of GPIO | 8 bits | — |
| Supply Voltage Range | 2.3 V to 5.5 V | 2.3 V to 5.5 V |
| I2C/SMBus Maximum Frequency | 400 kHz | 400 kHz |
| I2C/SMBus Supported Frequency | 100 kHz and 400 kHz | — |
| Interface | I2C-bus/SMBus | — |
| Interrupt Support | Yes | — |
| Port Register Features | Input/output and polarity configuration registers | — |
| Pull-Up Capability | Weak pull-up | — |
| Address Difference | PCA9554A has a different address | — |
| Boîtier | 16-pin TSSOP | 16-pin TSSOP |
| Type de montage | Surface mount | Surface mount |
| Température de fonctionnement | [DATA_NEEDED: Operating temperature range] | — |
| Maximum Output Current per Pin | [DATA_NEEDED: Maximum output current per pin] | — |
| Input Voltage Levels | [DATA_NEEDED: Input voltage thresholds] | — |
| Output Drive Capability | [DATA_NEEDED: Output drive current and output voltage characteristics] | — |
| Standby Current | [DATA_NEEDED: Standby current] | — |
| Operating Current | [DATA_NEEDED: Typical and maximum operating current] | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Number of I/O Lines | — | 8 lines |
| I/O Port Width | — | 8 bits |
| Type d'interface | — | I2C and SMBus |
| Interrupt Output | — | Active-low, open-drain |
| Configuration Registers | — | 8-bit |
| Hardware Address Inputs | — | 3 inputs |
| Maximum Devices per Bus | — | 8 devices |
| Standby Current Consumption | — | 1 uA maximum |
| Plage de température de fonctionnement | — | -40 °C to 85 °C |
| Nombre de broches | — | 16 pins |
| Device Type | — | General-purpose I/O expander |
| Bus Addressing | — | Hardware-selectable I2C address |