PCA9554PW vs PCA9534APW 비교

다음의 상세 나란히 비교: PCA9554PW 제조: NXP Semiconductors 및 PCA9534APW 제조: Texas Instruments. 주요 사양, 전기적 파라미터, 패키징, 수명 주기 상태, 가격 및 재고를 비교하여 설계 요구 사항에 가장 적합한 부품을 결정하십시오.

NXP Semiconductors
PCA9554PW PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW ✓ 활성
Texas Instruments
PCA9534APW PCA9534APW - 8-Bit I2C I/O Expander | Texas Instruments

PCA9534APW - 8-Bit I2C I/O Expander | Texas Instruments

PCA9534APW ✓ 활성

사양 비교

파라미터 PCA9554PW PCA9534APW
브랜드 NXP Semiconductors Texas Instruments
카테고리 Interface ICs Interface ICs
수명 주기 상태 활성 활성
Product Type 8-bit I2C/SMBus I/O expander with interrupt —
Number of GPIO 8 bits —
Supply Voltage Range 2.3 V to 5.5 V 2.3 V to 5.5 V
I2C/SMBus Maximum Frequency 400 kHz 400 kHz
I2C/SMBus Supported Frequency 100 kHz and 400 kHz —
인터페이스 I2C-bus/SMBus —
Interrupt Support Yes —
Port Register Features Input/output and polarity configuration registers —
Pull-Up Capability Weak pull-up —
Address Difference PCA9554A has a different address —
패키지 16-pin TSSOP 16-pin TSSOP
실장 유형 Surface mount Surface mount
동작 온도 [DATA_NEEDED: Operating temperature range] —
Maximum Output Current per Pin [DATA_NEEDED: Maximum output current per pin] —
Input Voltage Levels [DATA_NEEDED: Input voltage thresholds] —
Output Drive Capability [DATA_NEEDED: Output drive current and output voltage characteristics] —
Standby Current [DATA_NEEDED: Standby current] —
Operating Current [DATA_NEEDED: Typical and maximum operating current] —
RoHS 상태 [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Number of I/O Lines — 8 lines
I/O Port Width — 8 bits
인터페이스 유형 — I2C and SMBus
Interrupt Output — Active-low, open-drain
Configuration Registers — 8-bit
Hardware Address Inputs — 3 inputs
Maximum Devices per Bus — 8 devices
Standby Current Consumption — 1 uA maximum
동작 온도 범위 — -40 °C to 85 °C
핀 수 — 16 pins
Device Type — General-purpose I/O expander
Bus Addressing — Hardware-selectable I2C address

데이터시트 & 자료

모든 제품 보기 BOM 생성 견적 요청