PCA9554PW vs PCA9534APW So sánh

So sánh chi tiết song song của PCA9554PW bằng NXP Semiconductors và PCA9534APW bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

NXP Semiconductors
PCA9554PW PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW - 8-Bit I/O Expander with Interrupt | NXP

PCA9554PW ✓ Hoạt động
Texas Instruments
PCA9534APW PCA9534APW - 8-Bit I2C I/O Expander | Texas Instruments

PCA9534APW - 8-Bit I2C I/O Expander | Texas Instruments

PCA9534APW ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số PCA9554PW PCA9534APW
Thương hiệu NXP Semiconductors Texas Instruments
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type 8-bit I2C/SMBus I/O expander with interrupt —
Number of GPIO 8 bits —
Supply Voltage Range 2.3 V to 5.5 V 2.3 V to 5.5 V
I2C/SMBus Maximum Frequency 400 kHz 400 kHz
I2C/SMBus Supported Frequency 100 kHz and 400 kHz —
Giao diện I2C-bus/SMBus —
Interrupt Support Yes —
Port Register Features Input/output and polarity configuration registers —
Pull-Up Capability Weak pull-up —
Address Difference PCA9554A has a different address —
Hộp 16-pin TSSOP 16-pin TSSOP
Kiểu lắp đặt Surface mount Surface mount
Nhiệt độ hoạt động [DATA_NEEDED: Operating temperature range] —
Maximum Output Current per Pin [DATA_NEEDED: Maximum output current per pin] —
Input Voltage Levels [DATA_NEEDED: Input voltage thresholds] —
Output Drive Capability [DATA_NEEDED: Output drive current and output voltage characteristics] —
Standby Current [DATA_NEEDED: Standby current] —
Operating Current [DATA_NEEDED: Typical and maximum operating current] —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Number of I/O Lines — 8 lines
I/O Port Width — 8 bits
Loại giao diện — I2C and SMBus
Interrupt Output — Active-low, open-drain
Configuration Registers — 8-bit
Hardware Address Inputs — 3 inputs
Maximum Devices per Bus — 8 devices
Standby Current Consumption — 1 uA maximum
Khoảng nhiệt độ hoạt động — -40 °C to 85 °C
Số chân — 16 pins
Device Type — General-purpose I/O expander
Bus Addressing — Hardware-selectable I2C address

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá