PCF8574P vs PCF8574NG4 Comparaison
Comparaison détaillée côte à côte de PCF8574P par NXP Semiconductors et PCF8574NG4 par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | PCF8574P | PCF8574NG4 |
|---|---|---|
| Marque | NXP Semiconductors | Texas Instruments |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Remote 8-bit I2C I/O expander with interrupt | 8-bit I/O expander |
| Number of I/O Ports | 8 ports | — |
| Port Width | 8 bits | — |
| Supply Voltage Range | 2.5 V to 6 V | 2.5 V to 6 V |
| I2C Bus Frequency | 100 kHz | — |
| Bus Interface | Two-wire bidirectional I2C-bus | — |
| Serial Clock Pin | SCL | — |
| Serial Data Pin | SDA | — |
| Hardware Address Inputs | 3 inputs | — |
| Interrupt Output | 1 open-drain interrupt output | 1 open-drain interrupt output |
| Port Type | 8 quasi-bidirectional I/O ports | 8-bit quasi-bidirectional |
| Boîtier | 16-pin DIP | 16-DIP (0.300 inch, 7.62 mm) |
| Type de montage | Through-hole | Through-hole |
| Plage de température de fonctionnement | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Port Output Current | [DATA_NEEDED: maximum port output current] | — |
| I2C Pull-Up Requirement | External pull-up resistors required | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Interface | — | I2C |
| Bus Frequency | — | 100 kHz |
| Number of I/O Lines | — | 8 lines |
| Bus Type | — | Two-line bidirectional |
| Nombre de broches | — | 16 pins |
| Lead Pitch | — | 7.62 mm |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |