PCF8574P vs PCF8574NG4 Karşılaştırma
Ayrıntılı yan yana karşılaştırma PCF8574P tarafından NXP Semiconductors ve PCF8574NG4 tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.
Özellik Karşılaştırması
| Parametre | PCF8574P | PCF8574NG4 |
|---|---|---|
| Marka | NXP Semiconductors | Texas Instruments |
| Kategori | Interface ICs | Interface ICs |
| Yaşam Döngüsü Durumu | Aktif | Aktif |
| Device Type | Remote 8-bit I2C I/O expander with interrupt | 8-bit I/O expander |
| Number of I/O Ports | 8 ports | — |
| Port Width | 8 bits | — |
| Supply Voltage Range | 2.5 V to 6 V | 2.5 V to 6 V |
| I2C Bus Frequency | 100 kHz | — |
| Bus Interface | Two-wire bidirectional I2C-bus | — |
| Serial Clock Pin | SCL | — |
| Serial Data Pin | SDA | — |
| Hardware Address Inputs | 3 inputs | — |
| Interrupt Output | 1 open-drain interrupt output | 1 open-drain interrupt output |
| Port Type | 8 quasi-bidirectional I/O ports | 8-bit quasi-bidirectional |
| Paket | 16-pin DIP | 16-DIP (0.300 inch, 7.62 mm) |
| Montaj Türü | Through-hole | Through-hole |
| İşletim Sıcaklığı Aralığı | [DATA_NEEDED: operating temperature range] | [DATA_NEEDED: operating temperature range] |
| Maximum Port Output Current | [DATA_NEEDED: maximum port output current] | — |
| I2C Pull-Up Requirement | External pull-up resistors required | — |
| RoHS Durumu | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| REACH Status | [DATA_NEEDED: REACH status] | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | [DATA_NEEDED: AEC-Q100 qualification status] | — |
| Arayüz | — | I2C |
| Bus Frequency | — | 100 kHz |
| Number of I/O Lines | — | 8 lines |
| Bus Type | — | Two-line bidirectional |
| Pin Sayısı | — | 16 pins |
| Lead Pitch | — | 7.62 mm |
| Maximum Input Voltage | — | [DATA_NEEDED: maximum input voltage] |
| Durağan Akım | — | [DATA_NEEDED: quiescent current] |
| Output Sink Current | — | [DATA_NEEDED: output sink current] |