PCM5121PW vs PCM5122PW Comparaison

Comparaison détaillée côte à côte de PCM5121PW par Texas Instruments et PCM5122PW par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

Texas Instruments
PCM5121PW PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW ✓ Actif
Texas Instruments
PCM5122PW PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW ✓ Actif

Comparaison des spécifications

Paramètre PCM5121PW PCM5122PW
Marque Texas Instruments Texas Instruments
Catégorie ADC/DAC ADC/DAC
Statut du cycle de vie Actif Actif
Device Type Stereo audio digital-to-analog converter —
Dynamic Performance 106 dB —
Maximum Output Voltage 2 V RMS —
Interface Format PCM —
Supported Audio Word Lengths 16 bit, 24 bit, 32 bit —
Maximum Sampling Rate 384 kHz 384 kHz
Output Architecture 2 V RMS DirectPath DirectPath
DAC Architecture Segment-DAC architecture —
Audio Processing Fixed audio processing Fixed audio processing
Output Channels 2 channels: OUTL and OUTR —
Load Coupling Support DC-coupled or AC-coupled loads —
Out-of-Band Noise Improvement Up to 20 dB lower than existing DAC technology —
Clock Jitter Tolerance Improved tolerance; numerical value not stated —
Boîtier 28-pin TSSOP 28-pin TSSOP (PW)
Type de montage Surface mount Surface mount
Supply Voltage Range [DATA_NEEDED: supply voltage range] 3 V to 3.6 V
Plage de température de fonctionnement [DATA_NEEDED: operating temperature range] -25 °C to +85 °C
Statut RoHS [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Stereo audio digital-to-analog converter
Configuration de sortie — 2 channels
Dynamic Range — 112 dB
Maximum Output Amplitude — 2 V RMS
Digital Audio Resolution — Up to 32 bit
Digital Audio Interface — PCM interface
Control Interface — I2C and SPI
Output Impedance — [DATA_NEEDED: output impedance]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
Total Harmonic Distortion plus Noise — [DATA_NEEDED: THD+N]
Power Consumption — [DATA_NEEDED: power consumption]
AEC-Q100 Qualification — unknown

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis