PCM5121PW vs PCM5122PW तुलना

विस्तृत दोनों ओर की तुलना PCM5121PW द्वारा Texas Instruments और PCM5122PW द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
PCM5121PW PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW ✓ सक्रिय
Texas Instruments
PCM5122PW PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW ✓ सक्रिय

विशेषता तुलना

पैरामीटर PCM5121PW PCM5122PW
ब्रांड Texas Instruments Texas Instruments
श्रेणी ADC/DAC ADC/DAC
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Stereo audio digital-to-analog converter —
Dynamic Performance 106 dB —
Maximum Output Voltage 2 V RMS —
Interface Format PCM —
Supported Audio Word Lengths 16 bit, 24 bit, 32 bit —
Maximum Sampling Rate 384 kHz 384 kHz
Output Architecture 2 V RMS DirectPath DirectPath
DAC Architecture Segment-DAC architecture —
Audio Processing Fixed audio processing Fixed audio processing
Output Channels 2 channels: OUTL and OUTR —
Load Coupling Support DC-coupled or AC-coupled loads —
Out-of-Band Noise Improvement Up to 20 dB lower than existing DAC technology —
Clock Jitter Tolerance Improved tolerance; numerical value not stated —
पैकेज 28-pin TSSOP 28-pin TSSOP (PW)
माउंटिंग प्रकार Surface mount Surface mount
Supply Voltage Range [DATA_NEEDED: supply voltage range] 3 V to 3.6 V
ऑपरेटिंग तापमान रेंज [DATA_NEEDED: operating temperature range] -25 °C to +85 °C
RoHS स्थिति [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Stereo audio digital-to-analog converter
आउटपुट कॉन्फ़िगरेशन — 2 channels
Dynamic Range — 112 dB
Maximum Output Amplitude — 2 V RMS
Digital Audio Resolution — Up to 32 bit
Digital Audio Interface — PCM interface
Control Interface — I2C and SPI
Output Impedance — [DATA_NEEDED: output impedance]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
Total Harmonic Distortion plus Noise — [DATA_NEEDED: THD+N]
Power Consumption — [DATA_NEEDED: power consumption]
AEC-Q100 Qualification — unknown

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध