PCM5121PW vs PCM5122PW Karşılaştırma

Ayrıntılı yan yana karşılaştırma PCM5121PW tarafından Texas Instruments ve PCM5122PW tarafından Texas InstrumentsAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Texas Instruments
PCM5121PW PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW - 106dB Stereo Audio DAC | Texas Instruments

PCM5121PW ✓ Aktif
Texas Instruments
PCM5122PW PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW - 112dB Stereo Audio DAC | Texas Instruments

PCM5122PW ✓ Aktif

Özellik Karşılaştırması

Parametre PCM5121PW PCM5122PW
Marka Texas Instruments Texas Instruments
Kategori ADC/DAC ADC/DAC
Yaşam Döngüsü Durumu Aktif Aktif
Device Type Stereo audio digital-to-analog converter —
Dynamic Performance 106 dB —
Maximum Output Voltage 2 V RMS —
Interface Format PCM —
Supported Audio Word Lengths 16 bit, 24 bit, 32 bit —
Maximum Sampling Rate 384 kHz 384 kHz
Output Architecture 2 V RMS DirectPath DirectPath
DAC Architecture Segment-DAC architecture —
Audio Processing Fixed audio processing Fixed audio processing
Output Channels 2 channels: OUTL and OUTR —
Load Coupling Support DC-coupled or AC-coupled loads —
Out-of-Band Noise Improvement Up to 20 dB lower than existing DAC technology —
Clock Jitter Tolerance Improved tolerance; numerical value not stated —
Paket 28-pin TSSOP 28-pin TSSOP (PW)
Montaj Türü Surface mount Surface mount
Supply Voltage Range [DATA_NEEDED: supply voltage range] 3 V to 3.6 V
İşletim Sıcaklığı Aralığı [DATA_NEEDED: operating temperature range] -25 °C to +85 °C
RoHS Durumu [DATA_NEEDED: RoHS status] unknown
REACH Status [DATA_NEEDED: REACH status] unknown
Automotive Qualification [DATA_NEEDED: AEC-Q100 qualification status] —
Product Type — Stereo audio digital-to-analog converter
Çıkış Konfigürasyonu — 2 channels
Dynamic Range — 112 dB
Maximum Output Amplitude — 2 V RMS
Digital Audio Resolution — Up to 32 bit
Digital Audio Interface — PCM interface
Control Interface — I2C and SPI
Output Impedance — [DATA_NEEDED: output impedance]
Signal-to-Noise Ratio — [DATA_NEEDED: signal-to-noise ratio]
Total Harmonic Distortion plus Noise — [DATA_NEEDED: THD+N]
Power Consumption — [DATA_NEEDED: power consumption]
AEC-Q100 Qualification — unknown

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin