S912XEG384J2CAL vs MC9S12DG256CMPV Comparaison

Comparaison détaillée côte à côte de S912XEG384J2CAL par NXP Semiconductors et MC9S12DG256CMPV par NXP Semiconductors. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.

NXP Semiconductors
S912XEG384J2CAL S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)

S912XEG384J2CAL - 16-bit HCS12X MCU, 384KB Flash | NXP (Tape & Reel)

S912XEG384J2CAL ✓ Actif
NXP Semiconductors
MC9S12DG256CMPV MC9S12DG256CMPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP

MC9S12DG256CMPV - 16-bit HCS12 MCU 256KB Flash 112-LQFP | NXP

MC9S12DG256CMPV ✓ Actif

Comparaison des spécifications

Paramètre S912XEG384J2CAL MC9S12DG256CMPV
Marque NXP Semiconductors NXP Semiconductors
Catégorie Microcontrollers Microcontrollers
Statut du cycle de vie Actif Actif
Core Architecture HCS12X (S12X CPU + XGATE co-processor) —
Core Bit Width 16-bit —
Maximum CPU Frequency 50 MHz —
Program Flash Memory 384 KB —
SRAM 24 KB —
EEPROM [DATA_NEEDED: EEPROM size] 4 KB
XGATE Co-processor Yes (RISC peripheral co-processor) —
Boîtier LQFP-112 (20x20 mm, CAL) 112-LQFP (20 x 20 mm, 0.65 mm pitch)
Plage de température de fonctionnement -40C to +85C (industrial grade, 'J2' mask) —
GPIO Count Up to 91 —
ADC 12-bit SAR ADC, up to 24 channels 10-bit, 8 channels
CAN Interface MSCAN (1 module) —
Serial Interfaces SCI (UART), SPI, I2C —
Timers ECT (16-bit), PIT, RTI Enhanced Capture Timer (ECT), 8 x PWM, 1 x RTI
On-chip Voltage Regulator Yes (internal 3.3V/5V) —
Tension d'alimentation 5V typical (3.3V-5.5V range) —
Type de montage Surface Mount (LQFP, gull-wing leads) Surface Mount (gull-wing)
Statut RoHS Compliant (per LCSC listing) [DATA_NEEDED: RoHS status - not present in verified snippet]
Core — HCS12 CPU12 (CISC, 16-bit, upward-compatible with HC11)
Maximum CPU Clock — 25 MHz (50 MHz effective instruction throughput via look-ahead fetch)
Program Memory (Flash) — 256 KB (256K x 8)
RAM — 12 KB
Operating Voltage — 2.5 V / 5 V (single supply with on-chip regulator)
I/O Voltage — 5 V tolerant
CAN Modules (MSCAN) — 1 x MSCAN 2.0A/B-compatible
SCI / SPI — 2 x SCI, 1 x SPI
BDLC (J1850) — 1 module (VPW)
Nombre de broches — 112
Température de fonctionnement — -40 C to +85 C (automotive AEC-Q100)
AEC-Q100 Qualification — Qualified (automotive grade)

Fiches techniques et ressources

Parcourir tous les produits Créer un BOM Demander un devis