SN65HVD37D vs MAX3483ESA+ Comparaison
Comparaison détaillée côte à côte de SN65HVD37D par Texas Instruments et MAX3483ESA+ par Maxim Integrated. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)
SN65HVD37D ✓ Actif
Comparaison des spécifications
| Paramètre | SN65HVD37D | MAX3483ESA+ |
|---|---|---|
| Marque | Texas Instruments | Maxim Integrated |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Device Type | Transceiver (1 driver / 1 receiver) | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Supply Voltage (VCC) | 3 V to 3.6 V (nominal 3.3 V) | — |
| Signaling Rate | Up to 25 Mbps | — |
| Receiver Unit Load | 1/8 unit load (up to 256 nodes) | — |
| Bus-Pin ESD Protection (HBM) | >15 kV HBM | — |
| Receiver Hysteresis | 60 mV (typical) | — |
| Quiescent Current (active) | 1 mA (typical) | — |
| Standby / Shutdown Current | <1 uA (typical) | — |
| Température de fonctionnement | -40 C to +85 C | — |
| Boîtier | 14-SOIC (D), 0.154" / 3.90 mm width | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| RoHS / Lead-Free | RoHS compliant, lead-free (per TI product page) | — |
| Fail-Safe Receiver | Yes (idle/open/short safe) | — |
| Driver / Receiver Enable | Independent DE and RE pins | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Tension d'alimentation | — | 3.3 V |
| Verified Supply Range | — | 3 V to 3.6 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver and Receiver Count | — | 1 driver and 1 receiver |
| Duplex Mode | — | Half-duplex |
| Interface Standards | — | RS-485 and RS-422 |
| Driver Architecture | — | Slew-rate limited |
| EMI Control | — | Slew-rate limitation reduces EMI and reflections |
| Low-Speed Error-Free Transmission | — | Up to 250 kbps |
| Power Architecture | — | 3.3V-powered, low-power transceiver |
| Operating Voltage | — | 3 V to 3.6 V |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating for MAX3483ESA+] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Receiver Output Type | — | [DATA_NEEDED: receiver output type] |
| Termination Requirement | — | [DATA_NEEDED: termination and biasing details] |
| Statut RoHS | — | [DATA_NEEDED: RoHS status] |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |
| Halogen-Free Status | — | [DATA_NEEDED: halogen-free status] |