SN65HVD37D vs MAX3483ESA+ موازنہ

تفصیلی ساتھ ساتھ موازنہ از SN65HVD37D بذریعہ Texas Instruments اور MAX3483ESA+ بذریعہ Maxim Integrated. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔

Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ فعال

خصوصیات کا موازنہ

پیرامیٹر SN65HVD37D MAX3483ESA+
برانڈ Texas Instruments Maxim Integrated
زمرہ Interface ICs Interface ICs
لائف سائیکل کی حالت فعال فعال
Device Type Transceiver (1 driver / 1 receiver) —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1 / 1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V (nominal 3.3 V) —
Signaling Rate Up to 25 Mbps —
Receiver Unit Load 1/8 unit load (up to 256 nodes) —
Bus-Pin ESD Protection (HBM) >15 kV HBM —
Receiver Hysteresis 60 mV (typical) —
Quiescent Current (active) 1 mA (typical) —
Standby / Shutdown Current <1 uA (typical) —
آپریٹنگ درجہ حرارت -40 C to +85 C —
پیکیج 14-SOIC (D), 0.154" / 3.90 mm width 8-SOIC
ماؤنٹنگ ٹائپ Surface Mount Surface mount
RoHS / Lead-Free RoHS compliant, lead-free (per TI product page) —
Fail-Safe Receiver Yes (idle/open/short safe) —
Driver / Receiver Enable Independent DE and RE pins —
Product Type — RS-485/RS-422 transceiver
سپلائی وولٹیج — 3.3 V
Verified Supply Range — 3 V to 3.6 V
Maximum Data Rate — 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Duplex Mode — Half-duplex
Interface Standards — RS-485 and RS-422
Driver Architecture — Slew-rate limited
EMI Control — Slew-rate limitation reduces EMI and reflections
Low-Speed Error-Free Transmission — Up to 250 kbps
Power Architecture — 3.3V-powered, low-power transceiver
Operating Voltage — 3 V to 3.6 V
ESD Protection — [DATA_NEEDED: ESD protection rating for MAX3483ESA+]
آپریٹنگ درجہ حرارت رینج — [DATA_NEEDED: operating temperature range]
سپلائی کرنٹ — [DATA_NEEDED: supply current]
Receiver Output Type — [DATA_NEEDED: receiver output type]
Termination Requirement — [DATA_NEEDED: termination and biasing details]
RoHS اسٹیٹس — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

Datasheets اور وسائل

تمام مصنوعات براؤز کریں BOM بنائیں قیمت کی درخواست کریں