SN65HVD37D vs MAX3483ESA+ तुलना

विस्तृत दोनों ओर की तुलना SN65HVD37D द्वारा Texas Instruments और MAX3483ESA+ द्वारा Maxim Integrated. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
SN65HVD37D SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D - 3.3V Full-Duplex RS-485 Transceiver | TI (Tape & Reel)

SN65HVD37D ✓ सक्रिय
Maxim Integrated
MAX3483ESA+ MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ - 3.3V 10Mbps RS-485/RS-422 Transceiver

MAX3483ESA+ ✓ सक्रिय

विशेषता तुलना

पैरामीटर SN65HVD37D MAX3483ESA+
ब्रांड Texas Instruments Maxim Integrated
श्रेणी Interface ICs Interface ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Device Type Transceiver (1 driver / 1 receiver) —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1 / 1 —
Duplex Full —
Supply Voltage (VCC) 3 V to 3.6 V (nominal 3.3 V) —
Signaling Rate Up to 25 Mbps —
Receiver Unit Load 1/8 unit load (up to 256 nodes) —
Bus-Pin ESD Protection (HBM) >15 kV HBM —
Receiver Hysteresis 60 mV (typical) —
Quiescent Current (active) 1 mA (typical) —
Standby / Shutdown Current <1 uA (typical) —
ऑपरेटिंग तापमान -40 C to +85 C —
पैकेज 14-SOIC (D), 0.154" / 3.90 mm width 8-SOIC
माउंटिंग प्रकार Surface Mount Surface mount
RoHS / Lead-Free RoHS compliant, lead-free (per TI product page) —
Fail-Safe Receiver Yes (idle/open/short safe) —
Driver / Receiver Enable Independent DE and RE pins —
Product Type — RS-485/RS-422 transceiver
सप्लाई वोल्टेज — 3.3 V
Verified Supply Range — 3 V to 3.6 V
Maximum Data Rate — 10 Mbps
Driver and Receiver Count — 1 driver and 1 receiver
Duplex Mode — Half-duplex
Interface Standards — RS-485 and RS-422
Driver Architecture — Slew-rate limited
EMI Control — Slew-rate limitation reduces EMI and reflections
Low-Speed Error-Free Transmission — Up to 250 kbps
Power Architecture — 3.3V-powered, low-power transceiver
Operating Voltage — 3 V to 3.6 V
ESD Protection — [DATA_NEEDED: ESD protection rating for MAX3483ESA+]
ऑपरेटिंग तापमान रेंज — [DATA_NEEDED: operating temperature range]
सप्लाई करंट — [DATA_NEEDED: supply current]
Receiver Output Type — [DATA_NEEDED: receiver output type]
Termination Requirement — [DATA_NEEDED: termination and biasing details]
RoHS स्थिति — [DATA_NEEDED: RoHS status]
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]
Halogen-Free Status — [DATA_NEEDED: halogen-free status]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध