SN65HVD73DGSR vs MAX3485ESA+T Comparaison
Comparaison détaillée côte à côte de SN65HVD73DGSR par Texas Instruments et MAX3485ESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ ActifAnalog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ ActifComparaison des spécifications
| Paramètre | SN65HVD73DGSR | MAX3485ESA+T |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Part Number | SN65HVD73DGSR | — |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485 / RS-422 Full-Duplex Transceiver | RS-485/RS-422 transceiver |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Data Rate (max) | 20 Mbps | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Receiver Hysteresis | [DATA_NEEDED: typical receiver hysteresis in mV] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: -7 V to +12 V typical] | [DATA_NEEDED: receiver common-mode voltage range] |
| ESD Protection - HBM (bus pins) | ±30 kV | — |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | ±12 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| Plage de température de fonctionnement | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| Boîtier | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Statut RoHS | Compliant | — |
| Niveau MSL | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Enable Pins | DE (driver enable, active-high); RE (receiver enable, active-low) | — |
| Tension d'alimentation | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |