SN65HVD73DGSR vs MAX3485ESA+T 比較
詳細並排比較 SN65HVD73DGSR 由 Texas Instruments 與 MAX3485ESA+T 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況，以找出最符合您設計需求的元件。
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ 啟用中
規格比較
| 參數 | SN65HVD73DGSR | MAX3485ESA+T |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 類別 | Interface ICs | Interface ICs |
| 生命週期狀態 | 啟用中 | 啟用中 |
| Part Number | SN65HVD73DGSR | — |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485 / RS-422 Full-Duplex Transceiver | RS-485/RS-422 transceiver |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Data Rate (max) | 20 Mbps | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Receiver Hysteresis | [DATA_NEEDED: typical receiver hysteresis in mV] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: -7 V to +12 V typical] | [DATA_NEEDED: receiver common-mode voltage range] |
| ESD Protection - HBM (bus pins) | ±30 kV | — |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | ±12 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| 工作溫度範圍 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| 封裝 | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD | 8-SOIC |
| 安裝類型 | Surface Mount | Surface mount |
| RoHS 狀態 | Compliant | — |
| MSL 等級 | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Enable Pins | DE (driver enable, active-high); RE (receiver enable, active-low) | — |
| 供應電壓 | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| 供應電流 | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |