SN65HVD73DGSR vs MAX3485ESA+T 对比
详细并排对比 SN65HVD73DGSR 出自 Texas Instruments 和 MAX3485ESA+T 出自 Analog Devices。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
Texas Instruments
SN65HVD73DGSR - 3.3V Full-Duplex RS-485, 20Mbps, 12kV ESD | TI
SN65HVD73DGSR ✓ 量产中
规格对比
| 参数 | SN65HVD73DGSR | MAX3485ESA+T |
|---|---|---|
| 品牌 | Texas Instruments | Analog Devices |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Part Number | SN65HVD73DGSR | — |
| Manufacturer | Texas Instruments | — |
| Product Type | RS-485 / RS-422 Full-Duplex Transceiver | RS-485/RS-422 transceiver |
| Supply Voltage (VCC) | 3.0 V to 3.6 V | — |
| Data Rate (max) | 20 Mbps | — |
| Number of Drivers / Receivers | 1 / 1 | — |
| Duplex | Full | — |
| Receiver Hysteresis | [DATA_NEEDED: typical receiver hysteresis in mV] | — |
| Common-Mode Voltage Range | [DATA_NEEDED: -7 V to +12 V typical] | [DATA_NEEDED: receiver common-mode voltage range] |
| ESD Protection - HBM (bus pins) | ±30 kV | — |
| ESD Protection - IEC 61000-4-2 Contact (bus pins) | ±12 kV | — |
| Unit Load | 1/8 (up to 256 nodes) | — |
| 工作温度范围 | -40 °C to +125 °C | [DATA_NEEDED: operating temperature range] |
| 封装 | VSSOP-10 (DGS), 3.00 mm × 3.00 mm, PowerPAD | 8-SOIC |
| 安装类型 | Surface Mount | Surface mount |
| RoHS 状态 | Compliant | — |
| MSL 等级 | [DATA_NEEDED: MSL rating per JEDEC J-STD-020] | — |
| Enable Pins | DE (driver enable, active-high); RE (receiver enable, active-low) | — |
| 电源电压 | — | 3.3 V |
| Maximum Data Rate | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| 电源电流 | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |