SN75176 vs MAX3490CSA+ Comparaison
Comparaison détaillée côte à côte de SN75176 par Texas Instruments et MAX3490CSA+ par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ Actif
Comparaison des spécifications
| Paramètre | SN75176 | MAX3490CSA+ |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Température de fonctionnement | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | [DATA_NEEDED: output current] |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Boîtier | 8-pin PDIP (P) | 8-pin SOIC |
| Type de montage | Through-Hole | Surface Mount |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| Statut RoHS | Compliant | [DATA_NEEDED: RoHS compliance] |
| Product Type | — | RS-422/RS-485 interface transceiver |
| Tension d'alimentation | — | 3.3 V |
| Débit de données | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-422 and RS-485 |
| Driver Type | — | Slew-rate-limited true RS-485/RS-422 driver |
| Communication Mode | — | Differential |
| Network Capability | — | RS-422 point-to-point and RS-485 multipoint |
| Power Consumption | — | [DATA_NEEDED: quiescent current and supply current] |
| Common-Mode Range | — | [DATA_NEEDED: common-mode voltage range] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Termination | — | External network termination required for RS-485 applications |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | not_applicable |