SN75176 vs MAX3490CSA+ Ikinahambing

Detalyadong pagkakahiwalay na pagkakahambing ng SN75176 sa pamamagitan ng Texas Instruments at MAX3490CSA+ sa pamamagitan ng Analog Devices. Ikinahambing ang mga pangunahing paglalarawan, mga tama ng elektriko, paakay, kalagayan ng buhay, presyo, at pagkakaroon upang makita ang pinakamahusay na komponente para sa iyong mga kinakailangang pang disenyo.

Analog Devices
MAX3490CSA+ MAX3490CSA+ - 3.3V 10Mbps RS-422/RS-485 | Analog Devices

MAX3490CSA+ - 3.3V 10Mbps RS-422/RS-485 | Analog Devices

MAX3490CSA+ ✓ Nakahanda

Pagsanggunian na paghahambing

Parametro SN75176 MAX3490CSA+
Brand Texas Instruments Analog Devices
Kategorya Interface ICs Interface ICs
Katayuan ng Lifecycle Aktibo Aktibo
Fungsi Transceiver —
Protocol RS-422, RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis 50 mV (typical) —
Supply Voltage (Vcc) 4.75 V to 5.25 V —
Temperature na Operasyon 0 °C to +70 °C —
Driver Output Current ±60 mA (max) [DATA_NEEDED: output current]
Common-Mode Input Range -7 V to +12 V —
Differential Input Threshold ±200 mV —
Quiescent Supply Current (enabled) 30 mA (typical) —
Shutdown Supply Current 1 µA (typical) —
Packhaging 8-pin PDIP (P) 8-pin SOIC
Uri ng Pagpapasok Through-Hole Surface Mount
Standards Compliance ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 —
Tindminan RoHS Compliant [DATA_NEEDED: RoHS compliance]
Product Type — RS-422/RS-485 interface transceiver
Volte ng Pagbibigay — 3.3 V
Rate ng Data — 10 Mbps
Driver Count — 1
Receiver Count — 1
Supported Standards — RS-422 and RS-485
Driver Type — Slew-rate-limited true RS-485/RS-422 driver
Communication Mode — Differential
Network Capability — RS-422 point-to-point and RS-485 multipoint
Power Consumption — [DATA_NEEDED: quiescent current and supply current]
Common-Mode Range — [DATA_NEEDED: common-mode voltage range]
Receiver Sensitivity — [DATA_NEEDED: receiver input sensitivity]
Hanay ng Temperature na Operasyon — [DATA_NEEDED: operating temperature range]
ESD Protection — [DATA_NEEDED: ESD protection rating]
Termination — External network termination required for RS-485 applications
REACH Status — [DATA_NEEDED: REACH compliance]
AEC-Q100 Qualification — not_applicable

Mga Datasheets at Resources

Tingnan ang Lahat ng mga Produkto Lumikha ng BOM Hilingin ang Kita