SN75176 vs MAX3490CSA+ Comparação
Comparação detalhada lado a lado de SN75176 por Texas Instruments e MAX3490CSA+ por Analog Devices. Compare especificações principais, parâmetros elétricos, encapsulamento, status do ciclo de vida, preços e disponibilidade para determinar o melhor componente para os requisitos do seu projeto.
Texas Instruments
SN75176 - Differential Bus Transceiver RS-485/RS-422 | Texas Instruments
SN75176 ✓ Ativo
Comparação de especificações
| Parâmetro | SN75176 | MAX3490CSA+ |
|---|---|---|
| Marca | Texas Instruments | Analog Devices |
| Categoria | Interface ICs | Interface ICs |
| Status do ciclo de vida | Ativo | Ativo |
| Função | Transceiver | — |
| Protocol | RS-422, RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | 50 mV (typical) | — |
| Supply Voltage (Vcc) | 4.75 V to 5.25 V | — |
| Temperatura de operação | 0 °C to +70 °C | — |
| Driver Output Current | ±60 mA (max) | [DATA_NEEDED: output current] |
| Common-Mode Input Range | -7 V to +12 V | — |
| Differential Input Threshold | ±200 mV | — |
| Quiescent Supply Current (enabled) | 30 mA (typical) | — |
| Shutdown Supply Current | 1 µA (typical) | — |
| Encapsulamento | 8-pin PDIP (P) | 8-pin SOIC |
| Tipo de montagem | Through-Hole | Surface Mount |
| Standards Compliance | ANSI TIA/EIA-422-B, TIA/EIA-485-A, ITU V.11, ITU X.27 | — |
| Status RoHS | Compliant | [DATA_NEEDED: RoHS compliance] |
| Product Type | — | RS-422/RS-485 interface transceiver |
| Tensão de alimentação | — | 3.3 V |
| Taxa de dados | — | 10 Mbps |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Supported Standards | — | RS-422 and RS-485 |
| Driver Type | — | Slew-rate-limited true RS-485/RS-422 driver |
| Communication Mode | — | Differential |
| Network Capability | — | RS-422 point-to-point and RS-485 multipoint |
| Power Consumption | — | [DATA_NEEDED: quiescent current and supply current] |
| Common-Mode Range | — | [DATA_NEEDED: common-mode voltage range] |
| Receiver Sensitivity | — | [DATA_NEEDED: receiver input sensitivity] |
| Faixa de temperatura de operação | — | [DATA_NEEDED: operating temperature range] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| Termination | — | External network termination required for RS-485 applications |
| REACH Status | — | [DATA_NEEDED: REACH compliance] |
| AEC-Q100 Qualification | — | not_applicable |