SP485EEP-L vs SP485E Comparaison
Comparaison détaillée côte à côte de SP485EEP-L par MaxLinear et SP485E par MaxLinear. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ ActifComparaison des spécifications
| Paramètre | SP485EEP-L | SP485E |
|---|---|---|
| Marque | MaxLinear | MaxLinear |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Maximum Data Rate | 5 Mbps | — |
| Tension d'alimentation | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| Plage de température de fonctionnement | -40°C to +85°C | [DATA_NEEDED: operating temperature] |
| Boîtier | 8-pin PDIP | 8-pin NSOIC or PDIP |
| Type de montage | Through-hole | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| Statut RoHS | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| Fonction | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| Débit de données | — | 2.5 Mbps (max, SP485E non-slew-limited) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Receiver Input Impedance | — | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |