SP485EEP-L vs SP485E So sánh

So sánh chi tiết song song của SP485EEP-L bằng MaxLinear và SP485E bằng MaxLinear. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.

MaxLinear
SP485EEP-L SP485EEP-L - 5Mbps Half-Duplex RS-485 Transceiver | MaxLinear

SP485EEP-L - 5Mbps Half-Duplex RS-485 Transceiver | MaxLinear

SP485EEP-L ✓ Hoạt động

So sánh thông số kỹ thuật

Tham số SP485EEP-L SP485E
Thương hiệu MaxLinear MaxLinear
Danh mục Interface ICs Interface ICs
Trạng thái vòng đời Hoạt động Hoạt động
Product Type Half-duplex RS-485/RS-422 transceiver —
Maximum Data Rate 5 Mbps —
Điện áp cung cấp 5 V —
Supported Protocols RS-485 and RS-422 —
Process Technology BiCMOS BiCMOS
ESD Protection, Human Body Model Over ±15 kV —
ESD Protection, IEC61000-4-2 Air Discharge Over ±15 kV —
Khoảng nhiệt độ hoạt động -40°C to +85°C [DATA_NEEDED: operating temperature]
Hộp 8-pin PDIP 8-pin NSOIC or PDIP
Kiểu lắp đặt Through-hole Surface Mount (NSOIC) or Through-Hole (PDIP)
Transceiver Configuration 1 transmitter and 1 receiver —
Duplex Mode Half-duplex —
Power Consumption Low-power operation —
Enhanced ESD Performance Yes —
Legacy Pin Compatibility Pin-to-pin compatible with Exar SP481 and SP485 devices —
Delivery Format Tube —
Trạng thái RoHS [DATA_NEEDED: RoHS status] Compliant
REACH Status [DATA_NEEDED: REACH status] —
Chức năng — Transceiver
Protocol — RS-485, RS-422
Number of Drivers/Receivers — 1/1
Duplex — Half-duplex
Tốc độ dữ liệu — 2.5 Mbps (max, SP485E non-slew-limited)
Supply Voltage (VCC) — 4.75 V to 5.25 V
Receiver Input Sensitivity — ±200 mV
Receiver Input Impedance — 12 kΩ minimum, 15 kΩ typical
Common-Mode Range — −7 V to +12 V
ESD Protection (HBM) — ±15 kV
ESD Protection (IEC 61000-4-2 Air Discharge) — ±15 kV
Failsafe Receiver — Yes (open, shorted, idle bus)
Tri-State Enable Pins — Yes (DE, RE)

Hồ sơ kỹ thuật & Tài nguyên

Xem tất cả sản phẩm Tạo BOM Yêu cầu báo giá