SP485EEP-L vs SP485E 对比
详细并排对比 SP485EEP-L 出自 MaxLinear 和 SP485E 出自 MaxLinear。对比关键规格、电气参数、封装、生命周期状态、价格和供货情况，以确定最适合您设计需求的元器件。
MaxLinear
SP485E - Enhanced Low Power Half-Duplex RS-485/RS-422 Transceiver | MaxLinear
SP485E ✓ 量产中规格对比
| 参数 | SP485EEP-L | SP485E |
|---|---|---|
| 品牌 | MaxLinear | MaxLinear |
| 分类 | Interface ICs | Interface ICs |
| 生命周期状态 | 有效 | 有效 |
| Product Type | Half-duplex RS-485/RS-422 transceiver | — |
| Maximum Data Rate | 5 Mbps | — |
| 电源电压 | 5 V | — |
| Supported Protocols | RS-485 and RS-422 | — |
| Process Technology | BiCMOS | BiCMOS |
| ESD Protection, Human Body Model | Over ±15 kV | — |
| ESD Protection, IEC61000-4-2 Air Discharge | Over ±15 kV | — |
| 工作温度范围 | -40°C to +85°C | [DATA_NEEDED: operating temperature] |
| 封装 | 8-pin PDIP | 8-pin NSOIC or PDIP |
| 安装类型 | Through-hole | Surface Mount (NSOIC) or Through-Hole (PDIP) |
| Transceiver Configuration | 1 transmitter and 1 receiver | — |
| Duplex Mode | Half-duplex | — |
| Power Consumption | Low-power operation | — |
| Enhanced ESD Performance | Yes | — |
| Legacy Pin Compatibility | Pin-to-pin compatible with Exar SP481 and SP485 devices | — |
| Delivery Format | Tube | — |
| RoHS 状态 | [DATA_NEEDED: RoHS status] | Compliant |
| REACH Status | [DATA_NEEDED: REACH status] | — |
| 功能 | — | Transceiver |
| Protocol | — | RS-485, RS-422 |
| Number of Drivers/Receivers | — | 1/1 |
| Duplex | — | Half-duplex |
| 数据速率 | — | 2.5 Mbps (max, SP485E non-slew-limited) |
| Supply Voltage (VCC) | — | 4.75 V to 5.25 V |
| Receiver Input Sensitivity | — | ±200 mV |
| Receiver Input Impedance | — | 12 kΩ minimum, 15 kΩ typical |
| Common-Mode Range | — | −7 V to +12 V |
| ESD Protection (HBM) | — | ±15 kV |
| ESD Protection (IEC 61000-4-2 Air Discharge) | — | ±15 kV |
| Failsafe Receiver | — | Yes (open, shorted, idle bus) |
| Tri-State Enable Pins | — | Yes (DE, RE) |