SP485R vs SP485REP-L Comparaison
Comparaison détaillée côte à côte de SP485R par MaxLinear et SP485REP-L par Exar Corporation. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Comparaison des spécifications
| Paramètre | SP485R | SP485REP-L |
|---|---|---|
| Marque | MaxLinear | Exar Corporation |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Fonction | Transceiver | — |
| Protocol | RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| Débit de données | 5 Mbps | — |
| Tension d'alimentation | 4.75 V to 5.25 V | — |
| Température de fonctionnement | [DATA_NEEDED: operating temperature range C] | — |
| Receiver Input Impedance (RIN) | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) | — |
| Bus Loading | 1/10 unit load (supports 400+ transceivers on bus) | — |
| Input Sensitivity | +/-200 mV | — |
| Common-Mode Input Voltage Range | -7 V to +12 V | — |
| Shutdown Mode | Yes | — |
| Boîtier | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP | 8-pin plastic DIP |
| Type de montage | Surface Mount (SOIC) / Through-Hole (PDIP) | Through-hole |
| Pin-to-Pin Equivalent | SP485 (with higher RIN) | — |
| Statut RoHS | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| Receiver Unit Load | — | 1/10 unit load |
| Supported Transceivers per Line | — | More than 400 transceivers |
| Receiver Input Impedance | — | 150 kOhm typical |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Propagation Delay | — | 60 ns |
| Minimum Operating Temperature | — | -40 C |
| Maximum Operating Temperature | — | +85 C |
| Duplex Configuration | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Configuration | — | 1/1 differential driver |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |