SP485R vs SP485REP-L موازنہ
تفصیلی ساتھ ساتھ موازنہ از SP485R بذریعہ MaxLinear اور SP485REP-L بذریعہ Exar Corporation. اہم خصوصیات، برقی پیرامیٹرز، پیکیجنگ، لائف سائیکل اسٹیٹس، قیمتوں اور دستیابی کا موازنہ کریں تاکہ آپ کی ڈیزائن ضروریات کے لیے بہترین کمپوننٹ کا تعین ہو سکے۔
خصوصیات کا موازنہ
| پیرامیٹر | SP485R | SP485REP-L |
|---|---|---|
| برانڈ | MaxLinear | Exar Corporation |
| زمرہ | Interface ICs | Interface ICs |
| لائف سائیکل کی حالت | فعال | فعال |
| فنکشن | Transceiver | — |
| Protocol | RS-485 | — |
| Number of Drivers/Receivers | 1/1 | — |
| Duplex | Half | — |
| Receiver Hysteresis | [DATA_NEEDED: receiver hysteresis mV] | — |
| ڈیٹا ریٹ | 5 Mbps | — |
| سپلائی وولٹیج | 4.75 V to 5.25 V | — |
| آپریٹنگ درجہ حرارت | [DATA_NEEDED: operating temperature range C] | — |
| Receiver Input Impedance (RIN) | 120 kOhm minimum, 150 kOhm typical (1/10 unit load) | — |
| Bus Loading | 1/10 unit load (supports 400+ transceivers on bus) | — |
| Input Sensitivity | +/-200 mV | — |
| Common-Mode Input Voltage Range | -7 V to +12 V | — |
| Shutdown Mode | Yes | — |
| پیکیج | 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP | 8-pin plastic DIP |
| ماؤنٹنگ ٹائپ | Surface Mount (SOIC) / Through-Hole (PDIP) | Through-hole |
| Pin-to-Pin Equivalent | SP485 (with higher RIN) | — |
| RoHS اسٹیٹس | [DATA_NEEDED: rohs status] | [DATA_NEEDED: RoHS status] |
| Product Type | — | Half-duplex RS-485/RS-422 transceiver |
| Receiver Unit Load | — | 1/10 unit load |
| Supported Transceivers per Line | — | More than 400 transceivers |
| Receiver Input Impedance | — | 150 kOhm typical |
| Supply Voltage Range | — | 4.75 V to 5.25 V |
| Propagation Delay | — | 60 ns |
| Minimum Operating Temperature | — | -40 C |
| Maximum Operating Temperature | — | +85 C |
| Duplex Configuration | — | Half-duplex |
| Supported Standards | — | RS-485 and RS-422 |
| Driver Configuration | — | 1/1 differential driver |
| REACH Status | — | [DATA_NEEDED: REACH status] |
| AEC-Q100 Qualification | — | [DATA_NEEDED: AEC-Q100 qualification] |
| Lead-Free Status | — | [DATA_NEEDED: lead-free status] |