SP485R vs SP485REP-L 比較

詳細並排比較 SP485R 由 MaxLinear 與 SP485REP-L 由 Exar Corporation. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Exar Corporation
SP485REP-L SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L - 1/10 Unit Load RS-485 Transceiver | Exar

SP485REP-L ✓ 啟用中

規格比較

參數 SP485R SP485REP-L
品牌 MaxLinear Exar Corporation
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
功能 Transceiver —
Protocol RS-485 —
Number of Drivers/Receivers 1/1 —
Duplex Half —
Receiver Hysteresis [DATA_NEEDED: receiver hysteresis mV] —
資料速率 5 Mbps —
供應電壓 4.75 V to 5.25 V —
工作溫度 [DATA_NEEDED: operating temperature range C] —
Receiver Input Impedance (RIN) 120 kOhm minimum, 150 kOhm typical (1/10 unit load) —
Bus Loading 1/10 unit load (supports 400+ transceivers on bus) —
Input Sensitivity +/-200 mV —
Common-Mode Input Voltage Range -7 V to +12 V —
Shutdown Mode Yes —
封裝 8-pin narrow SOIC (SOIC-8) or 8-pin PDIP 8-pin plastic DIP
安裝類型 Surface Mount (SOIC) / Through-Hole (PDIP) Through-hole
Pin-to-Pin Equivalent SP485 (with higher RIN) —
RoHS 狀態 [DATA_NEEDED: rohs status] [DATA_NEEDED: RoHS status]
Product Type — Half-duplex RS-485/RS-422 transceiver
Receiver Unit Load — 1/10 unit load
Supported Transceivers per Line — More than 400 transceivers
Receiver Input Impedance — 150 kOhm typical
Supply Voltage Range — 4.75 V to 5.25 V
Propagation Delay — 60 ns
Minimum Operating Temperature — -40 C
Maximum Operating Temperature — +85 C
Duplex Configuration — Half-duplex
Supported Standards — RS-485 and RS-422
Driver Configuration — 1/1 differential driver
REACH Status — [DATA_NEEDED: REACH status]
AEC-Q100 Qualification — [DATA_NEEDED: AEC-Q100 qualification]
Lead-Free Status — [DATA_NEEDED: lead-free status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價