TAS5342DDVR vs TAS5142DDVR Comparaison
Comparaison détaillée côte à côte de TAS5342DDVR par Texas Instruments et TAS5142DDVR par Texas Instruments. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ ActifTexas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ ActifComparaison des spécifications
| Paramètre | TAS5342DDVR | TAS5142DDVR |
|---|---|---|
| Marque | Texas Instruments | Texas Instruments |
| Catégorie | Amplifier ICs | Amplifier ICs |
| Statut du cycle de vie | Actif | Actif |
| Product Type | Stereo digital amplifier power stage | Stereo Class-D audio amplifier power stage |
| Amplifier Class | Class D | — |
| Maximum Output Power | 100 W per channel | — |
| Channel Configuration | 1-channel mono or 2-channel stereo | — |
| Speaker Output Configuration | Bridge-tied load (BTL) | — |
| Boîtier | 44-HTSSOP | 44-pin HTSSOP (DDV) |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Typical Dual Supply Voltage | 10.8 V to 13.2 V | — |
| Maximum Load Resistance | 8 ohm | — |
| Input Signal | Differential input | — |
| Output Signal | Differential output | — |
| Maximum Power Dissipation | 2000 mW typical | — |
| Harmonic Distortion | [DATA_NEEDED: harmonic distortion specification] | — |
| Integrated Noise | [DATA_NEEDED: integrated noise specification] | — |
| Idle Current | [DATA_NEEDED: idle current specification] | — |
| Protection Features | Integrated protection system for multiple fault conditions | — |
| Plage de température de fonctionnement | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Statut RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Channel Count | — | 2 channels |
| Stereo Output Power | — | 100 W |
| Mono Output Power | — | 200 W |
| Input Signal Type | — | PWM |
| Amplifier Topology | — | Class-D |
| Supported BTL Loads | — | 4 ohm, 6 ohm, and 8 ohm |
| Supported PBTL Loads | — | 2 ohm and 3 ohm |
| Signal-to-Noise Ratio | — | >100 dB A-weighted |
| Total Harmonic Distortion Plus Noise | — | <0.1% at 1 W |
| Type de montage | — | Surface Mount |
| Nombre de broches | — | 44 pins |
| Thermal Construction | — | Thermally enhanced HTSSOP |
| Courant de repos | — | [DATA_NEEDED: quiescent current] |
| Protection Functions | — | [DATA_NEEDED: protection functions] |