TAS5342DDVR vs TAS5142DDVR तुलना

विस्तृत दोनों ओर की तुलना TAS5342DDVR द्वारा Texas Instruments और TAS5142DDVR द्वारा Texas Instruments. मुख्य विशेषताओं, इलेक्ट्रिकल पैरामीटर, पैकेजिंग, चक्र स्थिति, मूल्यांकन और उपलब्धता को तुलना करके अपनी डिजाइन की आवश्यकताओं के लिए सबसे अच्छा घटक निर्धारित करें。

Texas Instruments
TAS5342DDVR TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)

TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)

TAS5342DDVR ✓ सक्रिय
Texas Instruments
TAS5142DDVR TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)

TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)

TAS5142DDVR ✓ सक्रिय

विशेषता तुलना

पैरामीटर TAS5342DDVR TAS5142DDVR
ब्रांड Texas Instruments Texas Instruments
श्रेणी Amplifier ICs Amplifier ICs
लाइफसाइकिल स्थिति सक्रिय सक्रिय
Product Type Stereo digital amplifier power stage Stereo Class-D audio amplifier power stage
Amplifier Class Class D —
Maximum Output Power 100 W per channel —
Channel Configuration 1-channel mono or 2-channel stereo —
Speaker Output Configuration Bridge-tied load (BTL) —
पैकेज 44-HTSSOP 44-pin HTSSOP (DDV)
Supply Voltage Range 0 V to 34 V 0 V to 34 V
Typical Dual Supply Voltage 10.8 V to 13.2 V —
Maximum Load Resistance 8 ohm —
Input Signal Differential input —
Output Signal Differential output —
Maximum Power Dissipation 2000 mW typical —
Harmonic Distortion [DATA_NEEDED: harmonic distortion specification] —
Integrated Noise [DATA_NEEDED: integrated noise specification] —
Idle Current [DATA_NEEDED: idle current specification] —
Protection Features Integrated protection system for multiple fault conditions —
ऑपरेटिंग तापमान रेंज 0 C to 70 C [DATA_NEEDED: operating temperature range]
RoHS स्थिति [DATA_NEEDED: RoHS status] [DATA_NEEDED: RoHS status]
Channel Count — 2 channels
Stereo Output Power — 100 W
Mono Output Power — 200 W
Input Signal Type — PWM
Amplifier Topology — Class-D
Supported BTL Loads — 4 ohm, 6 ohm, and 8 ohm
Supported PBTL Loads — 2 ohm and 3 ohm
Signal-to-Noise Ratio — >100 dB A-weighted
Total Harmonic Distortion Plus Noise — <0.1% at 1 W
माउंटिंग प्रकार — Surface Mount
पिन काउंट — 44 pins
Thermal Construction — Thermally enhanced HTSSOP
क्वाइसेंट करंट — [DATA_NEEDED: quiescent current]
Protection Functions — [DATA_NEEDED: protection functions]

डेटाशीट और संसाधन

सभी उत्पादों को देखें BOM बनाएं कीट की अनुरोध