TAS5342DDVR vs TAS5142DDVR So sánh
So sánh chi tiết song song của TAS5342DDVR bằng Texas Instruments và TAS5142DDVR bằng Texas Instruments. So sánh các thông số quan trọng, thông số điện tử, gói gọn, trạng thái vòng đời, giá cả và khả năng cung cấp để xác định linh kiện tốt nhất cho yêu cầu thiết kế của bạn.
Texas Instruments
TAS5342DDVR - 100W Stereo Class D Power Stage | Texas Instruments (Tape & Reel)
TAS5342DDVR ✓ Hoạt độngTexas Instruments
TAS5142DDVR - 100W Stereo Class-D Power Stage | Texas Instruments (Tape & Reel)
TAS5142DDVR ✓ Hoạt độngSo sánh thông số kỹ thuật
| Tham số | TAS5342DDVR | TAS5142DDVR |
|---|---|---|
| Thương hiệu | Texas Instruments | Texas Instruments |
| Danh mục | Amplifier ICs | Amplifier ICs |
| Trạng thái vòng đời | Hoạt động | Hoạt động |
| Product Type | Stereo digital amplifier power stage | Stereo Class-D audio amplifier power stage |
| Amplifier Class | Class D | — |
| Maximum Output Power | 100 W per channel | — |
| Channel Configuration | 1-channel mono or 2-channel stereo | — |
| Speaker Output Configuration | Bridge-tied load (BTL) | — |
| Hộp | 44-HTSSOP | 44-pin HTSSOP (DDV) |
| Supply Voltage Range | 0 V to 34 V | 0 V to 34 V |
| Typical Dual Supply Voltage | 10.8 V to 13.2 V | — |
| Maximum Load Resistance | 8 ohm | — |
| Input Signal | Differential input | — |
| Output Signal | Differential output | — |
| Maximum Power Dissipation | 2000 mW typical | — |
| Harmonic Distortion | [DATA_NEEDED: harmonic distortion specification] | — |
| Integrated Noise | [DATA_NEEDED: integrated noise specification] | — |
| Idle Current | [DATA_NEEDED: idle current specification] | — |
| Protection Features | Integrated protection system for multiple fault conditions | — |
| Khoảng nhiệt độ hoạt động | 0 C to 70 C | [DATA_NEEDED: operating temperature range] |
| Trạng thái RoHS | [DATA_NEEDED: RoHS status] | [DATA_NEEDED: RoHS status] |
| Channel Count | — | 2 channels |
| Stereo Output Power | — | 100 W |
| Mono Output Power | — | 200 W |
| Input Signal Type | — | PWM |
| Amplifier Topology | — | Class-D |
| Supported BTL Loads | — | 4 ohm, 6 ohm, and 8 ohm |
| Supported PBTL Loads | — | 2 ohm and 3 ohm |
| Signal-to-Noise Ratio | — | >100 dB A-weighted |
| Total Harmonic Distortion Plus Noise | — | <0.1% at 1 W |
| Kiểu lắp đặt | — | Surface Mount |
| Số chân | — | 44 pins |
| Thermal Construction | — | Thermally enhanced HTSSOP |
| Điện áp yên tĩnh | — | [DATA_NEEDED: quiescent current] |
| Protection Functions | — | [DATA_NEEDED: protection functions] |