THVD1452DR vs MAX3485ESA+T Comparaison
Comparaison détaillée côte à côte de THVD1452DR par Texas Instruments et MAX3485ESA+T par Analog Devices. Comparez les spécifications clés, les paramètres électriques, le conditionnement, le statut de cycle de vie, les prix et la disponibilité pour déterminer le meilleur composant pour vos exigences de conception.
Texas Instruments
THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI
THVD1452DR ✓ ActifAnalog Devices
MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices
MAX3485ESA+T ✓ ActifComparaison des spécifications
| Paramètre | THVD1452DR | MAX3485ESA+T |
|---|---|---|
| Marque | Texas Instruments | Analog Devices |
| Catégorie | Interface ICs | Interface ICs |
| Statut du cycle de vie | Actif | Actif |
| Protocol | RS-422 / RS-485 | — |
| Fonction | 1/1 Transceiver, full-duplex | — |
| Number of Drivers/Receivers | 1/1 | — |
| Supply Voltage (VCC) | 3.0 V to 5.5 V | — |
| Maximum Data Rate | 50 Mbps | 10 Mbps |
| IEC ESD Protection (Bus Pins) | ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact | — |
| HBM ESD Protection | ±16 kV (all pins, HBM) | — |
| Common-Mode Voltage Range | -7 V to +12 V | [DATA_NEEDED: receiver common-mode voltage range] |
| Bus Unit Load | 1/8 UL (up to 256 nodes) | — |
| Receiver Fail-safe | True fail-safe (idle/short/open = logic high) | — |
| Quiescent Current (no load) | [DATA_NEEDED: Iq value] | — |
| Température de fonctionnement | -40°C to +125°C | — |
| Boîtier | SOIC-14 (D) | 8-SOIC |
| Type de montage | Surface Mount | Surface mount |
| Niveau MSL | 1 (per TI product page) | — |
| Statut RoHS | Compliant | — |
| Lead-free / Halogen-free | Yes / Yes | — |
| AEC-Q100 Automotive | Not applicable (no -Q1 suffix) | — |
| Product Type | — | RS-485/RS-422 transceiver |
| Tension d'alimentation | — | 3.3 V |
| Driver Count | — | 1 |
| Receiver Count | — | 1 |
| Duplex Mode | — | Half-duplex |
| Supported Standards | — | RS-422 and RS-485 |
| Package Dimensions | — | 3.90 mm width |
| Ordering Package | — | Tape and reel |
| Plage de température de fonctionnement | — | [DATA_NEEDED: operating temperature range] |
| Courant d'alimentation | — | [DATA_NEEDED: supply current] |
| Driver Propagation Delay | — | [DATA_NEEDED: driver propagation delay] |
| Receiver Propagation Delay | — | [DATA_NEEDED: receiver propagation delay] |
| ESD Protection | — | [DATA_NEEDED: ESD protection rating] |
| RoHS Compliance | — | [DATA_NEEDED: RoHS compliance status] |
| REACH Compliance | — | [DATA_NEEDED: REACH compliance status] |