THVD1452DR vs MAX3485ESA+T Karşılaştırma

Ayrıntılı yan yana karşılaştırma THVD1452DR tarafından Texas Instruments ve MAX3485ESA+T tarafından Analog DevicesAnahtar özellikleri, elektriksel parametreleri, ambalajı, yaşam döngüsü durumu, fiyatlandırma ve mevcudiyeti karşılaştırarak tasarım gereksinimleriniz için en iyi bileşeni belirleyin.

Özellik Karşılaştırması

Parametre THVD1452DR MAX3485ESA+T
Marka Texas Instruments Analog Devices
Kategori Interface ICs Interface ICs
Yaşam Döngüsü Durumu Aktif Aktif
Protocol RS-422 / RS-485 —
Fonksiyon 1/1 Transceiver, full-duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 3.0 V to 5.5 V —
Maximum Data Rate 50 Mbps 10 Mbps
IEC ESD Protection (Bus Pins) ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact —
HBM ESD Protection ±16 kV (all pins, HBM) —
Common-Mode Voltage Range -7 V to +12 V [DATA_NEEDED: receiver common-mode voltage range]
Bus Unit Load 1/8 UL (up to 256 nodes) —
Receiver Fail-safe True fail-safe (idle/short/open = logic high) —
Quiescent Current (no load) [DATA_NEEDED: Iq value] —
İşletim Sıcaklığı -40°C to +125°C —
Paket SOIC-14 (D) 8-SOIC
Montaj Türü Surface Mount Surface mount
MSL Seviyesi 1 (per TI product page) —
RoHS Durumu Compliant —
Lead-free / Halogen-free Yes / Yes —
AEC-Q100 Automotive Not applicable (no -Q1 suffix) —
Product Type — RS-485/RS-422 transceiver
Besleme Gerilimi — 3.3 V
Driver Count — 1
Receiver Count — 1
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Package Dimensions — 3.90 mm width
Ordering Package — Tape and reel
İşletim Sıcaklığı Aralığı — [DATA_NEEDED: operating temperature range]
Besleme Akımı — [DATA_NEEDED: supply current]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
ESD Protection — [DATA_NEEDED: ESD protection rating]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

Dökümanlar & Kaynaklar

Tüm Ürünleri Gözden Geçir BOM Oluştur Teklif İsteyin