THVD1452DR vs MAX3485ESA+T 比較

詳細並排比較 THVD1452DR 由 Texas Instruments 與 MAX3485ESA+T 由 Analog Devices. 比較關鍵規格、電氣參數、封裝、生命週期狀態、價格與供貨情況,以找出最符合您設計需求的元件。

Texas Instruments
THVD1452DR THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI

THVD1452DR - 3.3-5V RS-485 Transceiver, ±18kV ESD, SOIC-14 | TI

THVD1452DR ✓ 啟用中
Analog Devices
MAX3485ESA+T MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+T - 10Mbps RS-485/RS-422 Transceiver | Analog Devices

MAX3485ESA+T ✓ 啟用中

規格比較

參數 THVD1452DR MAX3485ESA+T
品牌 Texas Instruments Analog Devices
類別 Interface ICs Interface ICs
生命週期狀態 啟用中 啟用中
Protocol RS-422 / RS-485 —
功能 1/1 Transceiver, full-duplex —
Number of Drivers/Receivers 1/1 —
Supply Voltage (VCC) 3.0 V to 5.5 V —
Maximum Data Rate 50 Mbps 10 Mbps
IEC ESD Protection (Bus Pins) ±18 kV air-gap (IEC 61000-4-2); ±8 kV contact —
HBM ESD Protection ±16 kV (all pins, HBM) —
Common-Mode Voltage Range -7 V to +12 V [DATA_NEEDED: receiver common-mode voltage range]
Bus Unit Load 1/8 UL (up to 256 nodes) —
Receiver Fail-safe True fail-safe (idle/short/open = logic high) —
Quiescent Current (no load) [DATA_NEEDED: Iq value] —
工作溫度 -40°C to +125°C —
封裝 SOIC-14 (D) 8-SOIC
安裝類型 Surface Mount Surface mount
MSL 等級 1 (per TI product page) —
RoHS 狀態 Compliant —
Lead-free / Halogen-free Yes / Yes —
AEC-Q100 Automotive Not applicable (no -Q1 suffix) —
Product Type — RS-485/RS-422 transceiver
供應電壓 — 3.3 V
Driver Count — 1
Receiver Count — 1
Duplex Mode — Half-duplex
Supported Standards — RS-422 and RS-485
Package Dimensions — 3.90 mm width
Ordering Package — Tape and reel
工作溫度範圍 — [DATA_NEEDED: operating temperature range]
供應電流 — [DATA_NEEDED: supply current]
Driver Propagation Delay — [DATA_NEEDED: driver propagation delay]
Receiver Propagation Delay — [DATA_NEEDED: receiver propagation delay]
ESD Protection — [DATA_NEEDED: ESD protection rating]
RoHS Compliance — [DATA_NEEDED: RoHS compliance status]
REACH Compliance — [DATA_NEEDED: REACH compliance status]

資料表與資源

瀏覽所有產品 建立 BOM 索取報價